Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

*cough*

Okies

BYBY 13.6: http://members.optusnet.com.au/gusssy/byby%2013.16.avi

BYBY 13.2: http://members.optusnet.com.au/gusssy/byby%2013.2.avi

BYBY 13.5: http://members.optusnet.com.au/gusssy/byby%2013.5.avi

BYBY vs MINTIE: http://members.optusnet.com.au/gusssy/byby...vs%20mintie.avi

Mona 13.03: http://members.optusnet.com.au/gusssy2/mon...na%2013flat.avi

Mona 13.4: http://members.optusnet.com.au/gusssy2/mon...fake%2012.9.avi

Mona vs Ford: http://members.optusnet.com.au/gusssy2/mon...20vs%20ford.avi

Mona vs S13: http://members.optusnet.com.au/gusssy2/mon...%20vs%20s13.avi

Vids are up...The first few are Nick (Blitz from SAU) running.. the best ones are these ones where the commentators let you know exactly what they think of mona icon_razz.gif These ones:

Nick Vs Mona :Dhttp://members.optusnet.com.au/gusssy1/byb...vs%20msp25t.avi

Mintie vs Mona :Dhttp://members.optusnet.com.au/gusssy1/min...0attractive.avi

Sorry bout the weird filenames etc.. too tired :D:)

There's a few more vids including some of that FAT18T but ran outta webspace on optus account :D lemme know if someone wants to donate :D

sorry uncle.. I forgot some of you don't have XViD codec. The vids were encoded in XViD.

If you don't have the codec, you can download it from here:

http://www.roeder.goe.net/cgi-bin/fetch?fi....1-05062004.exe

IF you guys still have trouble tonight I can re-enc in Divx5 :)

dacow - i will let Cliffy (FAT18T) know where the vid is if you get some more space. I am sure he would be very appreciative :):D:D

So whos racing next meet??? We have some BFG's on the way from QLD and wanna see how the 200 goes??? Is anyone up for another night of street runs???




  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...