Jump to content
SAU Community

adjusting A/F ratios on a RB20DET?

sLo-32

By sLo-32,
in Engines & Forced Induction

 Share

Recommended Posts

sLo-32 Enthusiast

sLo-32

Posted
Posted

Ive been told that on the RB20DET there is a screw just behind the injectors facing towards the firewall that adjusts your A/F? Can someone confirm this? and give description of where exactly it is. I know it isnt wise to adjust your A/F ratios without getting it tuned on the dyno, but this is purely just out of curiosity.

Link to comment
https://www.sau.com.au/forums/topic/50169-adjusting-af-ratios-on-a-rb20det/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted
Ive been told that on the RB20DET there is a screw just behind the injectors facing towards the firewall that adjusts your A/F? Can someone confirm this? and give description of where exactly it is. I know it isnt wise to adjust your A/F ratios without getting it tuned on the dyno, but this is purely just out of curiosity.

Who on earth fed you that piece of crap information. The adjustment is for the Idle Air correction, has nothing to do with overall A/F ratios. Its the unit attached to the rear of the inlet manifold. If you look across the engine bay from the driver's side, there is a screw basically inline with the brake master cylinder reservoir.

As Roy said, some of the AFMs had an adjustment for AFR.

Chris32 Veteran

Chris32

Posted
Posted

There is a adjsutment on the back of the computer as well, here is the page from the RB20 manual......

It is to do with the idle adjustment, and like the one on the manifold, it will not adjsut anything more than the idle

You can adjust overall AFR's by installing a bleed valve on one of the vacum lines going to your fuel pressure reg. I have seen a article in a old Zoom mag where this was done. From memory -Joel- had one intstalled on his car with decent results

chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...