Jump to content
SAU Community

Recommended Posts

  • Replies 250
  • Created
  • Last Reply

Top Posters In This Topic

I'm going to cry if mine doesn't make it on to the ship that is arriving in december, I will speak to the shop today and find out how thye work over the december period and stuff

WHY IS NOTHING EVER EASY! god damn new cars, aren't the lots full! I drive past and think they can't have sold anything as there isn't anymore space to put cars on the lots

mark

(sorry, getting quite upset now as I wanted to drive it by xmas, it was my present to myself this year)

Guys

I imported a Soarer around Christmas 2 years ago and had heaps of probs including the Front whee falling off. The tyre joint stuffed up the front wheel nuts and it came off whilst on the way to the exhaust shop.

They ended up paying for all the repairs :D but it took 7 weeks to see the car on the road.

I m now in the process of importing a R32 GTST Type M and its missed the boat. :boohoo:

Oh well its to be expected. You would have thought I would have learnt the first time.

Cheers

I have spoken to my compliancer and they said they don't close down over xmas, so if the car gets here he said it will be in and out in a week including fitting the few mods I have

so thats some good news, hope fully its in on the next boat

They would be silly to close at that time with the amount of 15 year cars coming in at the moment. They'd only be doing themselves out of heavy business.

There would be thousands sitting over there in Japan, and that have recently landed.

Hello To you all, heres my update.. some 6 pages ago and back on 1/8 i was trying to find out times on import approval everyone saying 4-6 weeks.. well Guess what today was my lucky day! Finally.. ive been allowed to import a August 89 Gtr32 in November! There getting quick these days! Well that aint so sacastic for you all.. 14 days and longest like a month! :) oh i cant whinge about that.. i can only whinge about not driving it now.. and paying the holding fees at the docks!! Enough from me.. but i guess if someone asks me if it was worth importing affter my first drive which should be next week i guess ill say hell yeah but now, i should of just brought one here!

Hey guys, i sent my import approval off about 2 weeks before the correct month and i got it back in record time. The thing to consider is that the time it takes to receive back your approval is mostly taken up by the application waiting to be processed. It only takes then a few minutes to process it. So i received my approval back in excellent time and was very happy. Since then, earlier this week i heard that my car was landing today in brisbane (KIWI carrier). I wasent even aware it had gotton on board a ship! So that was very exciting. The car will be trucked down to me in Melbourne to my door after it passes thru customs and quarantine. So it should be in my hands in about 2 weeks max! Very excited. I've never even driven a GTR lol. I have had a fair bit of experience driving high powered turbo cars but never a GTR. Im sure it wont let me down :D

what agent did you use GODZILLA32??

I wasent going to use a Customs agent as my friend has imported alot of cars himself, but in the end when the lady called i think from KIWI car carriers i decided to just let them handle it all and be done with it. You can call the people im using on 03 9614 8100. Ask for Nicki Groves.

Well, I put mine through on the 25th last month, and got it today - that's a 20 day turnaround which is exactly how long they said it would take.

I would be happy - however i have sweet F.A chance of getting it on a ship any time soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...