Jump to content
SAU Community

Recommended Posts

I assume an '89 would be the best model given the amount of money I want to splash on fixing it up. Is there much difference between the later years (technically I mean and not in terms of wear and tear)? I think it's only with V-Spec its got the different breaking system.

- J.

There were very few changes of any sort across the R32 GT-R's lifespan. Those that come to mind are:

* The V-spec and V-spec II models: Brembos, different wheels.

* A change from push to pull clutch (or is it the other way, I can never remember).

* Some people claim a change in the interior trim: I have never seen concrete proof of this.

I'm sure there were a few others: do a search as it has been discussed before.

So really, apart from the condition element, I don't see a particularly good reason to spend the additional money and hassle associated with a R32 GT-R under SEVS.

LW.

  • 2 weeks later...

under the 15yr rule you can import cars with mods no probs and generally are worth it if you can find a nice example. There was this sweet R32 GTR with an almost brand new N1 engine fitted (yes the red one) for around $25,000... now that was a nice R32. I suggest you stay away from the dirt cheap examples with your budget, some look like they've had a hard life.

Getting one under SEVS isnt worth it in my opinion, you'll pay bucketload more for compliance for a car thats only a couple of years younger.

  • 2 weeks later...

when importing the car through, say, prestige, will you get the contacts to cgl when you initiate the import process or do you have to contact them yourself?

If so, can anyone please give me cgl's contact details?

SPHYNX[x']when importing the car through, say, prestige, will you get the contacts to cgl when you initiate the import process or do you have to contact them yourself?

If so, can anyone please give me cgl's contact details?

Prestige will send you an email upon purchasing your vehicle which recommends a customs agent (which for NSW will be CGL). You are not required to use a customs agent, so Prestige won't organise this for you.

Anyway, CGL's details can be found in the white pages:

Control Global Logistics Pty Ltd

1419 Botany Rd Botany 2019

(02) 9316 5744

Mobile Service 0411 260 363

LW.

The import process differs from import agent to agent. J-spec for example use their own CA (you can use your own on request, but it tends to be better to use theirs as they have a good repor and know the CA reps pretty well), and once all the customs work is sorted out they give you a bill for it. 1 less headache I reckon.

Also there's a certain myth about ALL 89's can come into the country and be complied regardless of what mods they have. Bollocks. At the end of the day the Engineer who signs off the car as meeting emission standards still has a say in it. As the system gets more restrictive the engineers are gettin more careful on what they sign off. So for example a dual to single turbo conversion won't be signed off. It has to at least look standard. So a GTR with 2 2530's shouldn't be a problem, but one with 1 big turbo hanging off it... good luck.

Also one of the guys who does compliancing work for J-Spec is on the verge of getting SEV's approval to comply R32's. Which means he can comply stock late models. The amount of inflation you get from Canadian and Australians wanting 89 GTRs counter balances the added costs of buying a dead stock later model GTR. Keep in mind that 89 R32's had 4 factory recalls in the first year of production.

Oh there's also a rule change in the works in the early weeks of next year (I know this because J-Spec was contacted by DOTARs and adviced not to buy any more 1990s as they might face "difficulties getting import approvals in the near future". They're still waiting for this in writing so that its official, but still).

Oh and did you know that KIWI has halved their shipping shedule? Getting a ship to put your car on is about as hard as it gets right now. There's only one a month from most carriers and there's about... ummm 3 carriers. Only KIWI will insure your car during transit.

Then there's the dead zone between Dec 20th and January 5th, where all sipping agents etc seem to switch off and not give a hoot who's car is where. Avoid shipping during this time as you'll probably end up having your car sit on a port either in japan or australia.

So in summary... wait a while, and buy a nice stock late model R32, at least you wont have every agent in australia and canada trying to bid against you at auctions or on yahoo and doubling the cost of your car.

That is all :)

A lovely 1994 R32 GTR with 70,000 klm grade 4 B and only a different exhaust and a scratch on the auction report sold for 1,100,000 which is the same as a high klm trashed 89 so I think personaly it is better to bring under SEVS as you get a newer lower klm car that has to be worth more money.

  • 3 weeks later...
  • 3 weeks later...
under the 15yr rule you can import cars with mods no probs and generally are worth it if you can find a nice example. There was this sweet R32 GTR with an almost brand new N1 engine fitted (yes the red one) for around $25,000... now that was a nice R32. I suggest you stay away from the dirt cheap examples with your budget, some look like they've had a hard life.

Getting one under SEVS isnt worth it in my opinion, you'll pay bucketload more for compliance for a car thats only a couple of years younger.

I am hearing conflicting information on the degree / amount of modifications that a 15 year old import can have. Whats the go ? Are there strict regulations saying that the car has to be returned to original condition (what about cefiro's....none of them are in original state and the compliance dudes probably have no idea what the original state looks like...) ??

Or does it depend on the state / regional transport ?

Or do I simply need a cool engineer ? What is the go ?

When I brought in my 12 months OverSeas personal '96 Leopard, it was modded to the max and it was no problem getting the plates.

XVLeo

emphasis on responsible engineer. I'll use one of our customer's car as an example... he got a GTR with a big single turbo conversion, the first engineer basically was OK with everything but the fact that the engine had a single turbo, they were never released as a RB26DET, nor was there any emissions data for it, and if the car got inspected randomly they'd catch him out. He has done many GTRs before and as long as they had 2 turbos then he was fine (even 2 GT2530's).

So we took the car to another engineer (after the first engineer charged us for the work and the customer getting frustrated and needless headaches for everyone involved), this engineer didn't care about all those mods, as far as he was concerned as long as the engine (not the tubo's) was an RB26DETT and the engine by itself had test data then he was fine.

The car is now complianced, roadworthied and registered.

So it all depends on who you talk to and how far they're willing to stick their neck out, and how good they are with interpreting their regulations :)

Funkymonkey, i see your point regarding buying a stock late model r32 under SEVS. It all makes so much more sense, I'm sure it would be easier to find a grade 4 one also seeing as its a newer car.

Also, would you suggest that the best time to initiate a purchase is like march for example?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...