Jump to content
SAU Community

RB20/25 Stainless Exhaust manifolds $580


Recommended Posts

Okay someone deleted the last one for some reason so heres the newy.

304 stainless steel, 6-1 style of extractors, 3mm wall thickness, high mount position, tail external wastegate monting flange (cut off and weld on your own adaptor), stainless flanges.

The downsides I can see are:

Not tuned length (No big drama for us lamo street boys)

Wastegate does not merge into gas flow

Looks like the turbo will sit very close to the rocker covers

I haven't seen one myself so I don't know what the welding is like and how it looks in terms of positioning. I also don't know the diameter.

On the plus side they are only $580 if we get 10! Extra $200 if you get 321 stainless (aircraft quality material).

Luch, can you please fill us in on the diameter and the chances of getting a different style of wastegate pipe that doesn't require the gas to do a 180 in the flow to control boost?

rbtop.jpg

RB20DET-TOP.jpg

lukevl : i bought one from luch (ljstt) last week on wednesday. i put the money in his account on thursday ... the manifold was sent on thursday and arrived first thing monday morning. sorry i would have gone in the group buy but i needed one urgently.

he even called on monday morning to see what i thought of the manifold. i like it and he gave me a good price, so i'm happy all round :D

so if you want one i can thoroughly recommend his service / products :D

  • 4 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...