Jump to content
SAU Community

Recommended Posts

Hey guys,

Me got an '93 R33 and it has one of these electronic front spoiler jobbies. It is supposed to work when over 80km/hr, controlled in the driver's seat by pushing a couple of buttons. Anyways I can only get it to work when i'm parked and have the handbrake on, or so it seems.

Throw some light on the subject!!!!!:)

Link to comment
https://www.sau.com.au/forums/topic/5074-spoiler-up-spoiler-down/
Share on other sites

The buttons are there so you can lower it when parked with the park brake on for cleaning or just admiring after all this is the only time you can see it . It pops back up when the handbrake comes off and activates automatically around 80Kph both up and down.

Anyone want to count up how many times this question has been answered here and on SDU :)

Spot on...

Reading from the manual

"GT Auto Spoiler switch

With the ignition ON the Auto spoiler has 3 modes: UP, DOWN, AUTO. Press the UP switch to have the Spoiler permanently in the UP position. Press the DOWN switch to have the Spoiler permanently in the DOWN position. Do not press either switch to have the spoiler in the AUTO position. In this mode the spoiler will automatically come down when the vehicle is driven over 70km/h and the spoiler will automatically rise back up when the vehicle slows to less than 50km/h"

how do we get a hold of the manuals?????

To My Knowledge no manuals exist except for a comprehensive owners book about $60 www.rmaimports.com.au which is worth having and an engine manual for the R32 which covers the CA18i RB20E, RB20DE,RB20DET, RB25DEand RB26DETT about $160

Some time ago gts32t posted in the sales business forum that he gould get any manuals translated to English for around $180 but was not willing, apparantly, to divulge any further info eg the source manual

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...