Jump to content
SAU Community

Recommended Posts

Iputs more torque to front wheels, not sure of %age, but more than 50

Can't be more than 50%, ATTESSA hydraulic pump locks up the clucthes to the front wheels, rear wheels are always solidly connected. So at max pressure best is 50/50.

What does the centre diff button do next to the steering wheel?

Try it on wet grass. When turned off Stagea spins rear wheels for a bit and then feeds some torque to the front wheels and drives off. When turned on, it just drives off straight away, no waiting.

Very handy as the rear doesn't step out in the snow and ice. Not much use to me, no snow and ice in Sydney. Could be handy in the pits with the trailer on the back when it's wet though. The old Foulcan used to sit there spinning it's one rear wheel. Had to get towed to the sealed pit road once at Bathurst, very embarassing.

Just one more reason for choosing a Stagea :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012070
Share on other sites

Hahahaha, good one SK, I can see it now, the old Foulcan smoking up one tyre in the pits and everyone looking thinking 'What the hell is he doing !!'...

Anyway, I just found this out last night as I was reading through heaps of Jap stuff on Stagea's.

With the button pressed in, the torque is 50/50 up to 20km/h. After 20km/h it sits at 80/20 (80% rear and 20% front) unless the front requires more, then it can vary up to 50/50.

Very interesting hay... You can see they were designed mainly for snow use (and would be great for pulling a boat out of the water at the boat ramp), and probably explains why you don't feel a big difference when driving normally with the button in.

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012334
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

i searched google japan and yahoo japan and all the sites i keep finding are all the same stuff just the specs some pics of the guy/girls cars and mods etc...

looking for more interesting stuff like what you just posted

:D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012409
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

I actually got the link from Rezz's post on the thread you started :D The first link, but it was in a link in that link - if that makes sense !!!

Here's the first link;

http://homepage2.nifty.com/WGNC34/tuningdatetop.htm

You have to click on 'INDEX' for it to bring down a list of other links.

That particular info is the third link down in that link :) - here's the link;

http://homepage2.nifty.com/WGNC34/tuningdouryoku.htm

To read it you have to put it into a translator (bablefish won't work for some reason....). I use this translator http://www.systransoft.com/ after a while you have to register, but it's free.

Then in some sort of Japglish you can make this out at the bottom of the page;

"You handle for the reference and there is this kind of statement in the instruction manual.

At the time (usually time) of synchronizer mode OFF basis: 0: 100 MAX50: Variable control up to 50

At the time of synchronizer mode ON below (when departing) vehicle speed 20 km... 50: 50 fixing

Above (when travelling) vehicle speed 20 km... basis 20: 80 MAX50: Variable control up to 50."

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012661
Share on other sites

good stuff jay thanks for the info

am trying to get my stagea site uploaded in the next couple of days

yeah babelfish is crappy i will try the systransoft program and see how i go :D

prank

good idea can you start one and maybe put the dash removal tutorial that shan posted a while back in there and sticky it??

:)

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012693
Share on other sites

so this is a good feature to have when chopping holden utes at the traffic lights in the rain?

:);) ;)

Mate he was soooooo far behind, I leasurely changed lanes and drove along at the speed limit. Still took him a K or so to catch up. Subaru Forresters are also fun, they keep looking in the rear view mirror wondering why this strange waggon is keeping up. KEEPING UP, huh I was looking for room to go around. And then there was 4 guys in 2 WRX's that got whiplash when I went in between them in a roll on at the lights.

I have been having so much fun. :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I see you've never had to push start your own car... You could save some weight right now...
    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
×
×
  • Create New...