Jump to content
SAU Community

Recommended Posts

I saw OBEHVE at calder last night..... what a monster!! Black R33 GTST

What is its best time??? i have done a search and it seems like a well known car but couldnt find a consistent time....

A young guy was driving it but it looked like he couldnt get the power down for a while, but when it picked up, christ did it move!!!!

I saw under the bonnet, looks like BIG dollars have been spent on it.....

Link to comment
https://www.sau.com.au/forums/topic/51367-obehve-at-calder-last-night/
Share on other sites

Yes OBEHVE is a monster and no it wasn't written off ages ago....I know this 'cause the owner has a few things done at ATP where I get my car worked on. If fact the GTR rear wing on my car was originally OBEHVE's.

The young guy driving it hasn't had much experience with the car running the figures it is atm so I wouldn't be surprised if it was sideways 1/2way down the 1/4!!! The owner of ATP often gets to drives it down the 1/4 'cause he can keep it straight :cheers:

yer, the owner doesnt actually race it @ calder. I've had a chat to him a number of times. He seems to be pretty cool. Been running on and off for 6 months or so.

It runs a big auto :thumbsdown:

Personal opinion... do it in a skyline... do it with a manual

yer, the owner doesnt actually race it @ calder. I've had a chat to him a number of times. He seems to be pretty cool. Been running on and off for 6 months or so.  

It runs a big auto  :thumbsdown:

Personal opinion... do it in a skyline... do it with a manual

bloody sweet car though

yer, the owner doesnt actually race it @ calder. I've had a chat to him a number of times. He seems to be pretty cool. Been running on and off for 6 months or so.  

It runs a big auto  :thumbsdown:

Personal opinion... do it in a skyline... do it with a manual

atleast he walk 10sec

Ash......yeah mate he isn't a bad bloke. The car used to be a manual but when it started pushing 300+kw at the wheels it was impossible keeping her straight thru 2nd and 3rd gears......the solution was found by fitting a manual-ised auto box. Apparently she stays very straight thru the gears under full noise now :P

atleast he walk 10sec

wtf are you on about?

Ya ant, but manual is half the fun of the skyza!

I must say though, i dunno how all these people are sideways in 2nd with 220-250rwkw when they come on boost or whatever.

i certainly aint with my car if i do a tidy gear change from 1st to 2nd.

Ash.....I know how much fun the manual is...I own one :P

Mate your car isn't putting out enough torque if you can't get sideways with the mods you've done......I had my car dynoed a couple of weeks ago and I'm getting sideways in 2nd and 3rd gears. Also thats with no gear change, I was in 3rd and hit the loud pedal thru the floor = soooo many Nm.....

Ash.....I know how much fun the manual is...I own one :)

Mate your car isn't putting out enough torque if you can't get sideways with the mods you've done......I had my car dynoed a couple of weeks ago and I'm getting sideways in 2nd and 3rd gears.  Also thats with no gear change, I was in 3rd and hit the loud pedal thru the floor = soooo many Nm.....

mmm... manual :P

you guys must be running some dodgy tyres or something i reckon.

i made 275kw @ race pace, drove home without a problem. As long as i dont go silly in 1st, 2nd was a breaze, and the car has a pretty phat graph. So it's not as if its only making power in 1000rpm.

I can get it sideways if i pop clutch, or just keep it sideways from a hard launch in 1st, but anyone can do that. Im talking 2nd, from 20km/h or so.

I get a squeal of tyre, but certainly not slide-ways.

Hrm. Once i get it back again (turbo spat a bearing) we'll see how it goes with more road "testing" ;)

Ash is this the turbo you got at a special price that shat itself??:D

LOL hasent it only done about 3000km??

Was this the backyard leb spec turbo special??? :(

I made 255kw @ 1 bar at racepace and if i go from 0km/h in second and floor it mine will wheel spin from 4000rpm to 7500rpm with 255 rear tyres. At 1.4 bar its even worse and 3rd gets slidy also.

denham. sh*tup you keyboard warrior. honestly, get over it will you.

there are many things that can cause a turbo to fail that fast.

maybe use your keyboard to find some of them? U seem to use it a fiar bit

Ash I dont need to use my keyboard as my turbo not blowing up for over 10,000km says it all :)

Only thing that can cause a brand new turbo to fail so quick is that it was made badly in the first place or you had a oil/water problems causing the bearing to fail from getting too hot

thats the only twot things you reckon?

lol. you've got no idea. There is a massive amount of things.

do your homework before you throw you keyboard around.

SLY - yer, could well be why the car wasnt right @ MAS. It blew the next day afterall lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...