Jump to content
SAU Community

Recommended Posts

Guys / Gals,

Any chance of having a cruise through the Nasho Park down to thirrull for pizza?????

Just wondering, as a few of us wanted to go last friday.......

All comments welcomed

Mike

How about we meet at the Macca's car park on Princes Hwy Kirrawee/ Shutherland @ around 8PM. Head out towards the Gong through the nasho park.

Will have to check if the nasho is open at the Gong end....... Head to Little Italy Pizza & Pasta.... Have a nice feed and then head back up the bulli pass.....

Or if the Nasho is closed just fly down Princes and we can take the Bulli pass road....

Does this clear up a few things????

Mike

Mate, if you want to plan a cruise go ahead..... and yes there is parking at little italy...... Around the back......

I was trying to do the righty for people missed the last cruise.... I will not be planning anything for this friday.. If you believe you can do it better go for it.

Mike

Mate,

sorry if I was abit abrasive before, however I am starting to get Jack of trying to get things going and everyone just shoots holes throough the suggested plan.......

If you have a comment let it be constructive.......

Comments are welcomed...... Well aimed shots are not!!!!

Mike

Wow, let this be a lesson in how not to organise a cruise.

Mike: In future if you want to organise a cruise, make a decision on where you would like to go and when so that you can provide specific details to anyone who is interested, then post a thread. If people dont like your suggested cruise venue/time/date then thats their problem.

Make sure your thread includes all relevant information on the planned destination, meeting time, meeting location etc to reduce the questions and keep things tidy.

This might make things easier for you next time :)

Nick

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...