Jump to content
SAU Community

Recommended Posts

I am going to rebuild my block over the winter, since it leaned out and my rings or ring lands went out. I am going forged pistons, rings, ARP head studs, and metal head gasket. The setup should be good to a little over 600hp with ease. My question is that I don't have that much money and am affraid that I am spending it all on the motor getting rebuilt and a bigger turbo with a few other goodies (FMIC, 720-850cc injectors, etc....).

My question to you guys is that I know the Q45 MAF can handle right around 600hp, but will an Apex'i SAFC or ROM tunned ecu handle those numbers?

What is the SAFC good to?

Also does anyone have another method or idea?

I just don't have the money to get an expensive stand alone (PowerFC, Link, Haltech, etc......)

Help would be greatly appreachated....thanks

Link to comment
https://www.sau.com.au/forums/topic/51770-fuel-managment500-600hp/
Share on other sites

a safc will be able to take u to a certain point where aftermarket management is needed

just dont go running 2 bar boost or something crazy

safc will do for the time but u really need to be doing a/f, timing etc to really achieve the best reliable results

so the SAFC is capable of 500-550hp?

I have not really seen that many use it after they get around 450+, but then agian those that have the money to achieve 500-600hp normally have the money to go stand alone. I do not though. I do plan on getting a Power FC sooner or later, but will not have the money right away.

I will have an SAFC and a adjustable FPR....and am hoping to acheive 500-500hp, if possible. Would like to hear everyones opinion first and see if it is possible.

I am going to rebuild my block over the winter, since it leaned out and my rings or ring lands went out. I am going forged pistons, rings, ARP head studs, and metal head gasket. The setup should be good to a little over 600hp with ease. My question is that I don't have that much money and am affraid that I am spending it all on the motor getting rebuilt and a bigger turbo with a few other goodies (FMIC, 720-850cc injectors, etc....).  

My question to you guys is that I know the Q45 MAF can handle right around 600hp, but will an Apex'i SAFC or ROM tunned ecu handle those numbers?

What is the SAFC good to?

Also does anyone have another method or idea?

I just don't have the money to get an expensive stand alone (PowerFC, Link, Haltech, etc......)

Help would be greatly appreachated....thanks

SAFC only adjust A/F ratios in pretty broard steps at that when used on a 600 bhp engine. It does NOTHING for igntion timing, in fact in many cases an SAFC makes the ignition timing problem worse. Following is a previous post of mine explaining why......

a quick, simplistic explanation of how an SAFC works might help...

As the airflow into the engine increase, the AFM records this as increased voltage that the ECU sees. What an SAFC does is sit in between the AFM and the ECU and take the voltages from the AFM and either increase or decrease them depending on what you have programmed the SAFC to do. By increasing the voltage, this tricks the ecu into pumping in more fuel, you do this when the engine is running lean. By decreasing the voltage, this tricks the ecu into pumping in less fuel, you do this when the engine is running rich.

The next bit is hard to understand unless you remember that the standard ecu does not supply fuel in direct proportion to the afm voltage ie; 4 volts is not twice as much fuel as 2 volts. Engine rpm, boost and throttle position also help the ecu determine how much fuel to add.

It has been my experience that RB25's run a little lean down low in the rpm range (Nissan do this for fuel economy and emissions) and a lot rich up high (Nissan do this to protect the engine). So I have to increase the voltage (using the SAFC) up to around 3,000 rpm (part throttle especially) and decrease the voltage over 5,000 rpm (full throttle).

The real problem is in the 3,000 to 5,000 rpm range as the engine comes on boost. They really need lots of fuel very quickly in this area. This can mean that you need to increase the voltage (that the ecu sees) over 5.1 volts to get the right A/F ratios. The ecu then goes into engine protection mode, rich and retarded (sounds like a girl I knew once) . Past that rpm you can start leaning it out as it runs too rich, so the voltage needs to be turned down under 5.1 volts. The ecu sees this as the engine not needing protection mode any more, no more rich and retarded.

It is not unusual to get good performance up to 3,000 rpm, then sluggish from 3,000 rpm to 5,000 rpm and then good performance from 5,000 rpm and over. The SAFC may not help this, in fact as explained above, it can in fact make it worse if the tuner is not switched on to this stuff.

With bent afm voltages, the ecu (tricked by the SAFC) also fires the ignition to suite the airflow it THINKS the engine is getting. This is not a good thing as you generally end up with ignition that is too far advanced in some rpm ranges.

The poor tuner has to juggle the SAFC settings, so that the A/F ratios are OK, the ecu doesn't get into rich and retard (engine protection) mode and the ignition timing is not too far advanced so as to cause detonation. My experience (I am not a good tuner) has been that this is full of compromises, sometimes you just can't win and have to reduce the boost level a bit to get even a reasonable compromise.

Keep in mind that this explanation is very simplified to make it fit in a reasonable space, the rpm's used are rough guides only and every car is different.

Hope it helps (and makes some sense). :D

Thanks for the info sidneykid, I know what the SAFC does and how it works, just wasn't sure where people have taken it (max hp). I know a few shops here in the states have taken it a little past 450hp....just checking if anyone has taken it past the 500hp mark.

Do you guys think it will be safe to use the SAFC and Q45 maf to 450hp and then in the near future get a power fc and tune it to my 600hp goal?

Has anyone used the ROM tune on their ecu?

If you use an Safc to lean out your car it also advances the timing and if you richen it it will retard the timing as it is tricking the ECU to think it is under more or less load so be careful.

Laptop tunable ECUs are only 1395 now and compared to a 600+hp motor thats cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...