Jump to content
SAU Community

Recommended Posts

about a month ago a guy ran into me, admitadly i was parked on the wrong side of the road,

what happened was i got my car out of a m8's drive way, because he wanted to get out and i was there to fix his parents computer so i just reversed on to the wrong side of the road, at about 7:30 i just finished up and was having a smoke with my m8s old man when i heard a loud bang, i thort fu(k thats my car!!!

i ran out onto the road and there was this fu(ken EA falcon launched into my car with no damage to his car what so ever...

the funny thing is that this guy got pulled over by the police and he got outta his car and left it in P or D and it rolled str8 into mine!

it did about $800 worth of damage and now the dodgy cu//t doesn't wanna pay! does anyone have any advice on what i should do,

the car is registered to this dude's bosses employer i rang him yesterday and he doesnt have insurance on it! should the boss be made to pay because it's his car?!?

the cop told me i wasnt in the wrong coz i was parked on the wrong side of the road so yeah should i take him to court or just send him the bill!?!? :matrix:

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

if its a work car they are required to have insurance and cover for their employees arent they?

anyway... if ur not covered i would be talking to a lawyer to see if u have the right to pursue them for the money and take it from there.

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1028783
Share on other sites

does it matter that i have only 3rd party? coz it wasnt worth it for me to get full comp coz they were only giving me $5000 back after i pay $3000 for insurance and excess, over $25k has been spent so it wasnt worth it...

i asked him yesterday if he had insurance but he rekons he doesnt!

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1028795
Share on other sites

Another option is to see your panelbeater explain the circumstances to them that the other driver was at fault and wont pay, some panel beaters have a debt recovery service with thier own lawyers and stuff so you dont have to spend any more time getting agro or forking out for your own lawyer. They do all the hard work for you and one way or another they will get thier money out of the guy

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1028844
Share on other sites

some, but there aint heaps as its a mission... and usually the panel beater is "struggling" for obvious reasons to take that kinda work.

A nice letter saying legal action will take place will do the trick, and if the cop saw it. Then your definately safe

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1028908
Share on other sites

Go to Amex Panels they also have a Debt recovery Service which is very very good.

Also, Amex Panels are extremely good panel beaters, being a recommended BMW repair place.

Now, they are expensive, but you wont be paying, so it doesn't matter.

People who have no insurance are driving around looking for trouble.

If you don't want to do something like that, your insurance company (most do) have a thing called a "Not at fault claim" where as long as you have the other parties details, they will fix your car and chase the other party for money.

I've used "Not at Fault" no less than 5 times. Each time somebody hits me, I contact the insurance company straight away, even if it's obvious that its the other parties fault so that I don't get the run around and the professionals handle the claim.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1029752
Share on other sites

I had my car ran into when a guy tried to just push me off the road on a highway. Anyway he didn't want to pay so I had to go through sending him letters of demand by a sheriff and then eventually it went to small claims court where the judged laughed at the guy and told him to pay me.

He ended up just going through his insurance company anyway so was just being a moron. Suffice to say that it was a pain in the ass. If these debt recovery agenices can do it less fuss to you then go for it.

I had third party at that time and can really see the benefit of comprehensive cause they chase the other party for the money.

;)

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1029782
Share on other sites

solicitors & barristers fees + court fees is going to be a lot more than $800.

its worth writing letters to them saying pay within 7 days otherwise further action will be taken, but seriously consider the costs of taking it to court compared to the $800 worth of damage.

Link to comment
https://www.sau.com.au/forums/topic/52167-dodgy-cuts/#findComment-1029789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...