Jump to content
SAU Community

GTST Skyline with 305rwkw and loads of mods

nismo_simo
 Share

Recommended Posts

nismo_simo Apprentice

nismo_simo

Posted
Posted

:rofl:

1994 GTST Skyline

HKS T51R SPL turbo

Custom Tubular stainless manifold

HKS Wastegate

Apexi AVCR Boost Controller

Microtech LT12s

Large FMI

Bilstein Suspension

HKS Springs

3.5in mandrel exhaust

17" Alloy Wheels

New Tyres

Custom Plenum

650cc Injectors

600hp Clutch (new) and lightened billet flywheel

Bosch 044 fuel pump and surge tank

Alpine stereo (amps, speakers, subs etc)

Forged oversized Pistons

Forged RB26 I-Beam rods

Tomei 1.8mm metal head gasket

Replaced all gaskets

Machined Crank

New bottom end and conrod bearings

Price starting at $28,000, but offers are welcome

nismo_simo Apprentice

nismo_simo

Posted
  • Author
Posted

Yes stupid question, these powers are all ratings not what they will handle or do. Just because the turbo is 1000hp doesn't mean it will do that by simply bolting on! With the clutch how it is, it is holding all that it is given to the extreme - no slip at all!

At 1.5bar it is making 305rwkw at the tread, which is roughly 410-430hp (roughly), so what I am saying is that if anyone wanted to buy this car and do any more POWER out of it, then you have a fair bit of room to go for the clutch to start slipping. It is a NPC clutch, which uses a nissan patrol turbo pressure plate (mega clamping force) and is currently allready running on 600hp supra that runs down the quarter quiet regular.

The specs of the turbo are a T4 Split pulse flange, .90 rear housing with a .72 polished front cover. It is a HKS T51R, which is stamped on the rear housing. The manifold that it attaches to is a custom Japanese built tubular stainless steel manifold. The wastegate comes off the manifold in a split pulse style way and straight onto the road for the ultimate scream!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...