Jump to content
SAU Community

Recommended Posts

Ok I have got to the end of my mental sanity...

I have a metallic ticking noise that starts at about 70-80km/h. It is loud enough that you can hear it at these speeds especially when driving beside a concrete or metal barrier as it seems to come from the DRIVERS side and definitely in the front...

This sound continues to 100-110km/h and is very constant as in methodical tick tick tick, and only slightly increased in reptitions as speed increases...

Now the tough part!!!

I have looked at the following aspects: and to no affect:

- All the fron wishbones, sway bars etc etc all bolts are tight and no bushes broken (I just replaces the drivers side tie rod end...and problem still there)...

- All the under body trays are secure, but the sound is metallic so that rules that out to start with...

- I no longer have a drivers side inner guard, front section. I have fabricated a brace from the sub frame to the side of the front bar, this is secure as is the rest of the inner guard so that rules that out.

- Engine just was rebuild and noise is not engine related otherwise revs would affect the noise...

I am lost anyone that can help out that may have had a similar noise please help its driving me insane. I am unsure if it is the power steering pump or any such thing. My mechanic and I have spent countless hours trying to work this out and everything works fine, no leaks just a really really annoying ticking noise...

Thanks

Neill

Link to comment
https://www.sau.com.au/forums/topic/52405-tick-tick-tack-bugger-off/
Share on other sites

What is the car?

You would be surprised where sounds ACTUALLY come from, often totally different to where they APPEAR to come from.

Have you looked at the inside faces of the wheels - there might be a clearance problem with the caliper, or similar.

I have removed all the wheels, they are 18x7.5 and the clearances are fine on the wishbone and the calipers. I have inscpected all the tyres and there are no nails or foreign objects...I even removed the smallest of stones in the tread with a screwdriver...

These sounds are louder than a nail or anything in a tyre...I have had people drive beside me and hear it and definitely the front...

I am reasonably mechanically minded - read I have been swinging spanners with my old boy since I was 8...and I cannot figure it out...

Oh and I almost forgot...R33 GTST, done 61,000kms...

Spacers on your front wheel can make a sound like you have discribed. Do you have spacers?

Negative...there are SMALL plastic adapters used on the front around the hub, against the rotor for the wheels as the centre of the wheels are wider...but thats it...

If it was the wheel brearing then it would make a noise even a slight one at lower speeds.

The bearing has been checked also...its driving me insane...

Did yours make a ticking noise or a clunking noise, or yet again a grinding noise????

And how much is a new bearing...

Ok well I spent alot of time again on the weekend and checked the following:

- Wheel bearing visual inspection only as it is a sealed unit. removed ABS sensor and all grease is fine, no metal particles and bearing makes NO noise when rotated (if it was going I would suspect it would make a noise at any speed)

- All gaskets inclduing inlet and exhaust, no leaks.

-Alternator bearing, no noise at any RPM or load,

- Uni joints, no noise bugger all play...

- As for valve spring then it would be there at various revs, also note that new springs were put into place when the engine was rebuilt 2,000km's ago...

the last thing I am going to look at is the brakes and whether the pads are moving around at all in the caliper...ran out of time to check this...

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...