Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i made one of these up ages ago but the dripping put me off but i found these but havnt had time to gettin round to buyin em

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...A:IT&ih=015

pretty sure thats the answer to your problems

let me know how you go as the cbf factor is high at the moment

i made one of these up ages ago but the dripping put me off but i found these but havnt had time to gettin round to buyin em

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...A:IT&ih=015

pretty sure thats the answer to your problems

let me know how you go as the cbf factor is high at the moment

This will solve the problem,

I didnt get around ot buying this part as i solved the dripping issue as stated but it does give u a unwanted water spray at the same time lol

To solve your dripping problems....simply add a T-piece at a high point close to the bottle. The one i used had adjustable jets in the connectors ( from a fish tank kit ) Slightly open up the jet at the top of the T piece ( so the inline pressure won't drop) and run the water line into the top of your water spray bottle,this way you won't have any more drips emptying the bottle overnite. :blink:

post-9170-1170658477.jpg

hey has ne1 got ne pics of the actual setup, as i have bought a kit..it comes with a bag for the water with a 12v pump attached to it, a pair of nozzles, a long tube, a switch n a few screws n wat looks like a few brackets :S any help would b reli awesome. thanks in advance

hey has ne1 got ne pics of the actual setup, as i have bought a kit..it comes with a bag for the water with a 12v pump attached to it, a pair of nozzles, a long tube, a switch n a few screws n wat looks like a few brackets :S any help would b reli awesome. thanks in advance

Wher edid u ge tthe kits? its pretty straigh forward, post a pic of what ya got and ill try and help ya out.

Does any one know which wire to cut to stop the rear wiper coming on when it's hooked up to the rear washer? Or have you guys all just disconnected the rear wiper?

Just go into the boost and unclip the wring plug into the wiper. I didn ttake much notice and unpluged only one plug at the rear wiper. turns out it disabled the wiper wiping every time i sprayed but if i needed to i turn the nob forward and the wiper still wipes when i want it!!!

Hay guys, just a heads up. I am in the process, propably still 4 months away, in designing and manufacturing and kit for IC spray for R33. These will include a new washerbottle to replace the existing. It will have two seperate reservours, one for normal windscreen spray, and one for IC spray. It will come with pump, electronics, hoses, and all fittings. It will also include a spray bar or a nozzle spray arrangment, depending on what is ordered.

The kist should sell for about $250-$300, but still sometime away. I have to do a lot of testing in regards to spray patterns and final cooling temerature to come up with optimal cooling for minimal watter consumption, and being a mech engineer helps. LOL.

The kits will be available for stock and aftermarket coolers. Hardest part is comming up with instructions, beleve me, you forget how much detail is required.

The kits will be made available for an R33 to start with, and all the testing will be performed on my car and a dyno to archive optimal results. Once complete, i will be looking for some testers, say 5 or so, to test the prodcust, free of charge, and if happy, they can purchase the kit or return it as required.

After the R33 kit is finalised, the R32 and R43 will follow.

So keep an eye out.

We are looking at using the Jaycar kits already modified to suit. However there are some other kits available that will do a simmilar job.

We are looking at temperature and load controll, so as the load increases, in accordance to injector duty and airflow, the cooler will operate outomatically, also, if the inlet air temperature is too high, it will operate. There will be also a manual vertion for those who simply want on/off operation, but that is some time off yet.

  • 3 weeks later...
  • 11 months later...

what i did mate, is i had the stock fuel pump lying around, so i stuck it into the water resorviour for the window wipers, fit in perfectly. the used a hose off that and fitted some misters. the stock r33 pump works a treat. but the whole bottle is emptied in 1.33sec :blush:.

i did that because i didnt want to stick in another bottle:S and i can still use my window squirters :nyaanyaa:

Edited by r33cruiser
  • 1 year later...

just another way to avoid those drips,

I put a T-peice in the IC sprayer line (up high)and ran the extra side to a small sprayer at the top of the radiator.The top inch of the bottle may still drip. but it cools the radiator and IC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...