Jump to content
SAU Community

Recommended Posts

Depends on what you want to spend really

Yokohama AVS V102

Goodyear Revspec

Dunlop FM901's (cheaper.)

Talk to Kosteras tyres in Kalamunda for advice.

They can supply tyres just this side of race rubber if you want to go down that path

Cheers

Link to comment
https://www.sau.com.au/forums/topic/5327-tyres/#findComment-81648
Share on other sites

this is what i'm looking at getting.

712-11.jpg

Kumho "Ecsta Supra" 712: Racetrack inspired, race-winning technology all wrapped up into a high performance street tyre. Race proven technology inspired the development of the Kumho ECSTA supra712 V and Z speed rated directional tyre. Designed to deliver a higher level of high speed performance in hydroplaning resistance and wet handling, the tread’s large lateral and centre channels provide maximum water evacuation for superior wet traction while an advanced silica tread compounding ensures excellent wet/ dry traction and handling. To further meet the demands of those drivers who require the best in handling and traction, the ECSTA Supra 712’s wide tread contact area provides dry grip, stability at high speeds and handling. Its sophisticated, directional tread design offers superior acceleration, braking (especially when rabbits happen to be in your road) and exceptional cornering. Altogether with its European design and styling, the ECSTA Supra 712 delivers ultra high performance, featuring black letter styling and available in 55-,50-,45-,40-, 35-, and 30 series, in H-, V-, Z-, and W speed rated sizes for 14 inch to 20 inch wheel diameters. Now world class beating quality with best value pricing will make sure your customers will know.

Link to comment
https://www.sau.com.au/forums/topic/5327-tyres/#findComment-81745
Share on other sites

hahahahahahahahha

sorry troy but dont get them

theyre pathetic

my mate has them in his 300zx, after 12,000ks of not very syko driving theyre incredibly bald, offer no grip and are weapons in the wet

bloody pathetic!

as an all round tyre the dunlop fm901s are very good, thats what im using at the moment. the sticker the tyre the quiker it will wear, like the SO3s... depends what youre after. an allround tyre or just one which will get you off the line. pirellis range are also good, but expensive. p-zeros have excellent grip!

Link to comment
https://www.sau.com.au/forums/topic/5327-tyres/#findComment-81819
Share on other sites

Spoke to Ray @ Kostera's and will probably settle on a set of Dunlop SP9000's @ 225/55 on the rear. Only because I've got stock rims and havent got the dough to get a set of 18x9's yet and fit some nice 255/45 tyres :) Cluth and tyres should be done in time for drags on wednesday 13th of november. Whose coming along?

Rob

Link to comment
https://www.sau.com.au/forums/topic/5327-tyres/#findComment-81836
Share on other sites

Originally posted by Steve

Guys, going to have to do a shameless plug for the boys at beaurepairs in Rocky - they gave me a great deal on the REVSPECs: 2 x 234/45/17 and 2x 255/40/17 fitted for 1k.  Saved several hundred on the list price.  

Steve

Steve

Who did you sleep with to get that price?

Best price I could get was $1320 from Beaurepaires in Perth area.

Link to comment
https://www.sau.com.au/forums/topic/5327-tyres/#findComment-84825
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...