Jump to content
SAU Community

Recommended Posts

I wouldnt be too worried about naming names as the Mod Stop is listed in the phone directory, have a legitimate shop with very obvious signage and all they do is mod playstations.... I would guess they rely largely on word of mouth and having a good reputation.... If they were worried about breaking the law they wouldnt have a shop on a main road??? :)

just so u all now, my uncle OWNS MODS PLUS and he can do raptor plus or n e other type of mod chip or ntsc conversion for the lowest price in perth. they do everyhting there. its worth goin down to have a look. not sure where its located, but should be in phone book

Scuba Steve :run:

ok heres the deal:

Buy yourself a ps2 network adaptor soon (rumors going around that sony has stop producing them)

download some software called ps2 hd handiness (i current can only get ps2 V0.5, tring to find V0.6 this is the software that allows you to copy ps2 games to the hd through the pc and then u can play them on the ps2)

Next buy HD-loader or HD-Loader Advance ($60 for advance getting this cod to me sometime next week)

Buy a Hard-drive still tring to find some info on the hd which work with the ps2

Just got mine mod'ed last week with a DUO 2. Cost $90 by a guy on Scarb Rd next to the Ampol station (Opposite Innaloo shopping centre).

Just wondering if you do decide to go with the SWAP card, make sure that you don't have TOC problem. I had one of those old swap mod, that caused me a lot of grief. The DUO2 can do basically everything, DVD-R, DVD5, DVD9 silver, CDR, Region free DVD etc ... Also can run Media player as well.

Downloading games !! Are you crazy :( !?? Are they DVD5 or CDR size ?? I can't see you download DVD5 too often ;) ..

Lets face it how many of us download DVD games!!?? I think at 56K it'll take me serveral years for one game :) .. Might as well, just rent it out and burn it on DVD-R. I can get 20 DVD-R for $11, that's 55cents per DVD-R. Much cheaper than storing it on HDD.

Downloading games !! Are you crazy :( !?? Are they DVD5 or CDR size ?? I can't see you download DVD5 too often  ;) ..  

Lets face it how many of us download DVD games!!?? I think at 56K it'll take me serveral years for one game :) .. Might as well, just rent it out and burn it on DVD-R. I can get 20 DVD-R for $11, that's 55cents per DVD-R. Much cheaper than storing it on HDD.

:werd:

With ADSL you can download a PS2 game over night

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...