Jump to content
SAU Community

Recommended Posts

G to perth autoclutch and see Roy (I think) look around $850-$900 for a 2500 pound pressure plate with a metal plate. Pretty much all you'll need for up to 400HP (at flywheel). I will be getting one next week as well... stock clutches are dogs when you start running more boost and power.

Rob

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-81841
Share on other sites

ross @ autoclutch

you cann get an organic with 2500lbs pressure plate for $650-$700

that price from cypher is a little expensive. i wouldnt use them for clutch stuff. go to someone who specialises in them.

if u look backa few pages i asked this same question and got a heap of repsonses.

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-81874
Share on other sites

Originally posted by adam 32

ross @ autoclutch

you cann get an organic with 2500lbs pressure plate for $650-$700

that price from cypher is a little expensive. i wouldnt use them for clutch stuff. go to someone who specialises in them.  

if u look backa  few pages i asked this same question and got a heap of repsonses.

ermm pardon my ignorance but can u explain whut an organic with 2500lbs pressure plate means?

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-81916
Share on other sites

HAHAHA! nice one dude! shouldn't be that hard to recognise ya then next time! Avatar should definately Help!

Lemme know how you go on the cluthc upgrade us i have a feeling mine too is on the way out and will need a replacement in the near future!

One question though guys. Due to my freewayd rives in peak hour and the odd occasion when i get too drunk and my gfriend has to drive what clutch is easy to operate and doesn't require having to put all your effort on the clutch pedal. I recall IMACUL8 getting one of these heavy duty clutch and he said the pedal was HEAPS harder to push down! i don't think my gfriend would drive it and i think i would have to push the car home from northbridge or sumfin!:D

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-82034
Share on other sites

25GTT:

my car has some kind of heavy duty clutch, got told it was a nismo one, but dunno what to believe, when i first drove the thing for a test drive i stalled it about 5 times, cause i was only used to standard skyline clutch:lol: :lol: :lol: , but its ok now that im used to it, heaps better than standard, it just takes a while for getting used to, and a few marks left a the lights :burnout:

Cam.

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-82039
Share on other sites

Flat top. Able towing service, ask for brian tell him Robert from harvey norman gave you his number. call him on 0418290469, he will flat top your car from your house to auto clutch. That price is good, you must have gone with the organic clutch and not the metal clutch. The metal one is the one I am getting and its around $850 drive in and out.

Rob

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-82444
Share on other sites

godfather thats the same clutch i got form there.

Seems good. But the grip point is real close to the floor, im used to it now,but you might want to get them to adjust it.

the only cr ap thing is it makes a loudish squeaking noise on idle wthout the clutch pushed in. when you push it in the sound stops. to me it sounds like a squeaky fan belt or something but obviously its related to the clutch. it sounds sh*t,but i havent been bothered going back there to get them to fix it.

Ben

Link to comment
https://www.sau.com.au/forums/topic/5359-1k-clutch/#findComment-82463
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...