Jump to content
SAU Community

Recommended Posts

Hi all,

As topic says I am after Brembo Calipers to suit an R32 GTR. (These can be found on R32 Vspec, R33 GTR and R34 GTR). I do not need the disks but if anyone has a "set" they want to sell I will consider it.

Only really after the fronts.

Hopefully someone can help me out.

Cheers!!

Link to comment
https://www.sau.com.au/forums/topic/53646-wtb-brembo-calipers-suit-r32-gtr/
Share on other sites

Dan , unless you have a set of discs ( which are 330mm, not 296mm like your 32R) then you will need the discs.

If you do have the discs then disregard the previous sentence.. :P

Cheers

Ken

Ken,

Yeah I'm chasing the discs as well, so I'm buying a new pair of DBA 5000s to suit the new calipers (when I can find them).

How much are Brembo calipers worth? I would make go_nuts an offer, however it is a little hard when I know nothing of what they're worth.

Da_Man: Sorry mate $3, 750 is a little out of my range.

$3750 is probably enough to get a set of AP 4 pot, that's almost what Race Brakes asked for when I call them up a year ago.......don't worry I am not chasing that sort of figure.

I can sell with the rotors or no rotors, it's up to you. My pads are only 2000km new, got them replaced during compliance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...