Jump to content
SAU Community

Recommended Posts

Grab a bleeder valve fro $100 and do that whenever aswell.

My Power FC is currently collecting dust under the bed untill i get the front mount done.

Literally!  Gotta get my act together  :P

could you explain the function of the bleeder valve.

I am the same ive had the intercooler for about 3 months now but havent gotten around to it until now. gonna do it all at once to avoid extra costs.

They are NOT interchangable so as long as you order the one for your car' date=' you will be fine. www.nengun.com has been used by heaps of people on these forums, do a search and you will see. Very cheap and comes with warranty.

does the FC commander from NENGUN come in english or japanese?

I remember reading on here about 3mths ago that Mr Nengun himself said that replacement ECU's are classed as "(something)" which doesn't incur any import taxes.

The tariff code that nengun references is 9032.89.80

http://www.apectariff.org/tdb.cgi/ff3235/a...ind.cgi?AU+9032

I Just Coped a $64 customs bill for a 2nd Hand power fc which was marked with value $400.

$20 Customs & $44 GST :(

can u dispute this with the info as quoted by ed previously -

" The tariff code that nengun references is 9032.89.80 "

http://www.apectariff.org/tdb.cgi/f...ind.cgi?AU+9032

decided to buy the system from nengun - total cost with delivery approx. $1100AUD. Thanx for all the advise guys - saved myself a couple of hundred dollars. Can now look into a better boost control.

Yeah I bought from nengun - probably ordered at the wrong time but it's here now - got a bit held-up from the Japanese holiday.

I also got the electronic boost controller and nismo adjustable fuel pressure reg.

Yeah I bought from nengun - probably ordered at the wrong time but it's here now - got a bit held-up from the Japanese holiday.

I also got the electronic boost controller and nismo adjustable fuel pressure reg.

nice - u gettin it tuned by a pro?

thats the go - I gotta travel to get mine done cos I live in such a limited area. I swear there is only 6 skylines in about a 150km radius where I live. we definitely stand out!! Does any body know much about evo in canberra?? Or should I go to sydney? I hear croydon are good tuners?

  • 2 weeks later...

got my power fc and commander today from www.nengun.com - luckily I wasnt stung with any extra duties or taxes( as I have heard of) - total cost = $1,104.90 delivered.

now I would like to know if any one can recommend a good tuner in the canberra region.

thnx. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...