Jump to content
SAU Community

Recommended Posts

hey guys, i was looking at getting a GT3071R with a 0.64 rear housing on a T25/T28 flange. was wondering if this would push to much boost for my stock internals. i currently only have 044 fuel pump , 3" turbo back exhaust, FMIC. i would obviously be getting a ECU remap straight after and have already got a boost controller. ANY HELP PLEASE ? my goal at the moment is 200rwkw+ but am looking to go further in the future!

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

hey guys, i was looking at getting a GT3071R with a 0.64 rear housing on a T25/T28 flange. was wondering if this would push to much boost for my stock internals. i currently only have 044 fuel pump , 3" turbo back exhaust, FMIC. i would obviously be getting a ECU remap straight after and have already got a boost controller. ANY HELP PLEASE ? my goal at the moment is 200rwkw+ but am looking to go further in the future!

As many others would say...Do a search!!

But i can tell you that a 3071 is overkill for 200rwkw...plus the flange is wrong...how much more than 200 do you want? 250? 300? 500? decide on what you want and then research from there...for lowish 200s you have several options...

  • 1 year later...

what sort of power should i get with the following mods,

i just copied and pasted im aware the a few things wont increase how many kw i have ;) lol

Nismo GT-R Bodykit

East-Bear Bonnet

Koyo Radiator

GReddy Spec LS Front Mount Intercooler

Trust Airinx Pod Filter

GReddy Oil Catch Can

Apexi "Pencil Type" Turbo Timer

Swoosh Boost & Oil Temp Gauges - Dual Gauge Holder

RS-R* Piping from Dump to Cat

Trust MX Exhaust Cat Back

KYB Short Stroke Struts - King Springs

Endless Carbon Brake Pads

what are the next few mods that should be on my list to boost a power but keep it fairly comfy as a daily driver

cheers

thanks mate,

any hot tips as to the next mods?

want to be hitting around 180 - 200kw at the treads

Read all the replies in this thread? If you want a budget 200rwkw get a r34 rb25 turbo, nistune, a r34 sidemount intercooler and full 3" exhaust. That will see you 180-200kw depending on the dyno and tune.

All the other stuff you listed is just ricey mods you don't need. Also if you are going to do the suspension do it properly and get some decent gear in there.

Edited by Rolls

sorry i was a bit lazy lol.

are the springs in it at the moment not that good?

i dont want to change the intercooler i have on it already

sounds like a new turbo and a tune is the way to go.

sorry i was a bit lazy lol.

are the springs in it at the moment not that good?

i dont want to change the intercooler i have on it already

sounds like a new turbo and a tune is the way to go.

Oh if you already have the intercooler then def stick with it, king springs are pretty awful, if you are going to go to the effort of changing them put something decent in. I assume you will be paying someone to do it and labour will be the bulk of the cost. As for shocks KYB aren't bad but you could get something better like koni or one of sydney kids bilstein packages for not much more. The ride quality and handling will be so much better.

edit: Are those mods what you already have done? or you are looking at doing?

edit2: I assume they are ones you already have. In that case yeah just look at a retune and an r34 rb25 turbo. If you do every plan on upgrading the susp then I'd look into the bilstein kits but as you already have them no biggie.

Edited by Rolls
Oh if you already have the intercooler then def stick with it, king springs are pretty awful, if you are going to go to the effort of changing them put something decent in. I assume you will be paying someone to do it and labour will be the bulk of the cost. As for shocks KYB aren't bad but you could get something better like koni or one of sydney kids bilstein packages for not much more. The ride quality and handling will be so much better.

edit: Are those mods what you already have done? or you are looking at doing?

edit2: I assume they are ones you already have. In that case yeah just look at a retune and an r34 rb25 turbo. If you do every plan on upgrading the susp then I'd look into the bilstein kits but as you already have them no biggie.

sorry i wasnt very specific, im buying the car on thursday if the mechanical says its all good.

these mods are already done.

the ones i want to do will be out of turbo, fuel pump, ecu and injectors.

depending on how much money i want to throw at the car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...