Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

well the real thanks gos to SST who built, tuned and helped with my car the whole way. Realy wanted to prove a point with the WOLF 3D and standard injectors. they are not maxed out yet and im not running massive rail pressure.

On a side note, can anyone tell me why you would run a cold car on a power run? when its still in cold start, explain that to me and speedworks please.

Another lesson learnt for the people chasing big HP in there RB25s.

Im waiting to start modding next year when im a bit more settled. Ive got my company car so the skyline only goes out on weekends and rarely cos fuel costs heaps here and cops are harsh and the poor road surfaces are extremely dangerous. Ive noticed perth roads to be much smoother, ive had some close calls here with little bumps and irregularities on the road surface causing the car to lose traction n get sideways :D

It will be long term but the Plans for it now are to get the engine rebuilt with aftermarket rods and pistons, head porting,aftermarket camshafts and gears. PowerFC, Trust T51ZR and a external wastegate (not to atmo). Ill probably get a larger full 4 inch exhaust and try and make it a bit quiet. I want around 550 rwhp which will see my 32 comfortably into the 10s.

Im at the moment very content with my car though so im not too worried.

Nice result :D However I hear that dyno reads high :|

and Tristan dude - you have the dirtiest engine bay in the world! If it wasn't making f*cken awesome power like that I'd be paying out on the filth :D hehehe

Once again standard injectors are proven to be able to cope with well above the 300+ rwhp misnomer amount. :( Great stuff.

Nice result :D However I hear that dyno reads high :|

and Tristan dude - you have the dirtiest engine bay in the world! If it wasn't making f*cken awesome power like that I'd be paying out on the filth :D hehehe

Once again standard injectors are proven to be able to cope with well above the 300+ rwhp misnomer amount. :( Great stuff.

no award for a dirty engine bay, its not that bad it just that i dont have bling.

did you or want to check my gate for carbon??

Tristans car was good for us as his car is used for work as is and runs pump BP and the only car that beat him was on race fuel and running major boost but still was an outstanding power maker.Yesterdays cars had to run stone cold but today the took them out side and warmed them up and we all know an engine at full temp makes a lot more power and PAS would not let us put Tristans car on warmed up today(Yes they realy did run tristans car cold on cold start and ppl would have seen the fuel smoke)

We were sad we could not take Ants dat to the shop last nite to fit the cooler and tune it as PAS management would not let us.

Lukes car ran 494rwhp on a DYno Dynamics a couple nights previous, so the reading were on the high side, but still two standout performances from Tristan and Luke:cheers:

Sorry Paul I don't agree - i would put my money on a hub dyno reading more accurately than a roller dyno.

And if it was reading a little high - then all figures for all cars are a little high - so Tristans would be to high as well???? What did Tristans make at SST during tuning???

Can't people just say "Top Effort" without having to make excuses or add there opinion.

588 was a top effort - no matter what fuel he used, how much the car was warmed up, etc ......

Dan

Lukes car ran 494rwhp on a DYno Dynamics a couple nights previous, so the reading were on the high side, but still two standout performances from Tristan and Luke:cheers:

Sorry Paul I don't agree - i would put my money on a hub dyno reading more accurately than a roller dyno.

And if it was reading a little high - then all figures for all cars are a little high - so Tristans would be to high as well???? What did Tristans make at SST during tuning???

Can't people just say "Top Effort" without having to make excuses or add there opinion.

588 was a top effort - no matter what fuel he used, how much the car was warmed up, etc ......

Dan

apparently tristan's made ~430 on sst's dyno? i agree with paul....

can someone confirm....?

i agree with you tho dan when you say its a big effort....because it is....

maybe the extra power on all the cars is a result of no tyre slippage on the dyno?? could that have that much effect?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...