Jump to content
SAU Community

Recommended Posts

anyone ever done it? the whole lot? if so any tips etc would be great

thanks

If you know how to paint ( you don't have to be an expert , as long as you painted before ) its very easy .

Take the dash out sand it with 600 or 800 then use grease + wax remover to clean it ( make sure there is no armarol residue left on it at all ) .

Go to auto paint shop and get plastic primer ( its clear stuff ) spay 2 coats on ( let it flash dry between coats ) then in about an hour spray the finishing coats ( any colour you want ) . acrylic paint works best on platics .

Some people don't use plastic primer and it peels off after a while .

Don't try to paint it if you never used a spray gun before , you will stuff it up .

Link to comment
https://www.sau.com.au/forums/topic/55052-dash-respray/#findComment-1074874
Share on other sites

If you are talking about the plastic that surrounds the stereo / a/c controls etc, and gear stick make sure you scrape / peel all the rubber coating off first, then sand and paint as wrxhoon described. If you dont get the rubber film off it then it crinkles up when paint hits it and looks pretty ordinary.

Lawrence

Link to comment
https://www.sau.com.au/forums/topic/55052-dash-respray/#findComment-1074889
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know it's an entirely different engine, but I noticed practically 0 difference removing or adding 2x 3in (5inch body) 400cell cats (one in each bank) with regards to sound. So changing the cat to change drone I suspect will have very very, very, very, very, very very minimal impact.
    • 200 cell cat will probably help. Do you have room to tee off a Helmholtz resonator anywhere along the exhaust? These can do wonders for drones, with a little experimentation with regards to length.
    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
×
×
  • Create New...