Jump to content
SAU Community

Nismo Fuel Pump Whining Noise??


N/A®
 Share

Recommended Posts

I have a Nismo Pump in the skyline. My question is why is it sometimes it constantly whines... (normal pump noise) whilst the car is running. Which should be what its suppose to be doing.

However sometimes it makes no noise at all. Is it on the way out?

Thanks

Link to comment
Share on other sites

I think the question was, why is it sometimes quiet?

I don't know, but I'd be wondering if it wasn't loose on the bracket. Sometimes it sits nicely so it doesn't move, sometimes (hit a bump or something) it'll vibrate against something and obviously you'll hear the noise. If it's not that, then without more info (or someone who knows of common problems with these pumps) you might have trouble getting answers.

Link to comment
Share on other sites

Fuel pumps maintain a pressure head in the fuel system, it whines when it is working, it stops working when the pressure head level is reached, and then kicks in and starts pumping again when the pressure drops below ..... [a set level]. It will always be working when you are booting hard, speeding, racing etc, it will be intermittant when you are cruising, driving through traffic, or in car parks etc. A fuel pump [a good one] is --in theory--designed to give a constant pressure/flow of fuel at the vehicles maximum potential, when you are not using the vehicles maximum performance potential the pump does the job so easily it can have a rest [sort of]. Most fuel pumps fitted are actully overdesigned, so that you can fit your fmic, exhaust, biggish turbo etc and still retain the std fuel pump. You will eventually max them out when mods outstrip the fuel pumps ability to provide.

Link to comment
Share on other sites

There is a gadget called the fuel pump control modulator FPCM which is basically a switching unit. You can bypass it by grounding the fuel pump straight to the inside of the boot. There have been many threads on this, the FPCM is the culprit sometimes when you're coasting and pop the clutch and the car stalls out for no reason at all. Sometimes it's not fast enough to catch up when you drop into neutral.

Link to comment
Share on other sites

Using same fuel pump, it makes noise after you start and it will go away after 30 or 40 secs.

You can also hear the noise if you put your foot on pedals to let you know that fuel is pumping.

That's what happen in my car :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...