Jump to content
SAU Community

Recommended Posts

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

CR ended up about .4 below standard so about 8.6.

Went with the ARGO rods and yes 256 poncams with matching springs.

Had Colin lloyd (Headsense) do the head work as well as machine and assemble the engine. Hopefully i can find the time to complete the rest at home with the help of my old man.

A break down of the costs involved with the engine build for those interested.

CP pistons $1185

Rings $275

Straighten & Polish Crank $182

Bore & hone block $188

Deck Block $110

Balance $ 267

Overhaul head $590

Porting $810

New guides $237

Cometic gasket $362

Big end bearings (ACL race) $89

Main bearing (King) $72

Gaskets etc. $28

Assembly $880

Total $5275

A break down of the costs involved with the engine build for those interested.

CP pistons $1185

Rings $275

Straighten & Polish Crank $182

Bore & hone block $188

Deck Block $110

Balance $ 267

Overhaul head $590

Porting $810

New guides $237

Cometic gasket $362

Big end bearings (ACL race) $89

Main bearing (King) $72

Gaskets etc. $28

Assembly $880

Total $5275

Thats a good price all up, where abouts did you get the work done?

Headsense (colin lloyd) at coopers plains. My only complaint with him was that it took a while before he got around to actually doing the work, he had my engine there for about 3 months. It's a one man workshop and he's pretty busy.

Headsense (colin lloyd) at coopers plains. My only complaint with him was that it took a while before he got around to actually doing the work, he had my engine there for about 3 months.  It's a one man workshop and he's pretty busy.

Yeah getting an engine built can test your patience, what made you choose him?

Does he have ALL the equipment to do the work on site?

Btw nice engine shot, looks really clean!

I went with him as previously i was getting most stuff done by Hardcore at slacks creek and i found out that he was the one that was doing all the headwork / machining for them so pretty much went straight to the source. He's pretty well known in drag racing circles and has been supercomp champion a few times now racing his own cars, you'll see his name across the top of the main stand at willowbank.

Putting the rest together and then putting it back in and hooking everything back up is the FUN part! Hooray. Then you will get it tuned and it will kill ya waiting to drive it. Leave the tuner in a nice cloud of white smoke all the way up the street....ohh such a good feeling when you got bulk power on tap :)

Cant wait till you post tuning results.

Still undecided with the tuning side of things. It will either be FIST performance or Mercury Motorsport. FIST have done all the work on my old mans XR6 turbo and they've looked after him very well but Mercury seem to have a better reputation around here.

I sent the plenum and rocker covers to be powder coated today. Have gone with gold for the rocker covers and textured black for them plenum. Pictures will be posted when i get them back. Hopefully they look ok.

powder coated hey. I know some people who hpc coat them...comes up pretty good. should look very nice.

Also mate, just wondering where did u find your v8 throttle body for the plenum. I could not for the life of me find one anywhere, and had to machine up an adapter plate to suit the std TB. Cheers.

Edited by r33_racer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...