Jump to content
SAU Community

Recommended Posts

R33 Series 1's have the front blinker with the small clear lense next to it, anyone no if this can be used for a fog/spot light? Or if a different light has to be brought? Anywhere in syd that sells them and prices?

If not too sure if you no what i mean check the pics out in my gallery/profile.. what the hek check them out and let me no what ya think of my 'line

Was an option I think, have seen a couple of S1's with this bit lit up like a driving light. Haven't heard of any kits to retro-fit lights to ones that don't have the option. I suspect getting the kit from Nissan would be expensive, the parts list for this assy is listed in FAST but there are quite a few bits to it!

If yours doesn't have fogs - they weren't optioned.

The factory optioned fogs have a 'shorter' orange section (notice the orange section of yours takes up like 2/3 of the entire width) to allow for the fog section.

Might be able to find them second hand...

I don't know if you can mod them - but I think it will be hard as there is not much chance there are reflectors that point the right way inside the clear section. What you can do is possibly tap the back of the reflector and put in a small socket and globe and turn them into parkers... don't know why you'd want to though

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...