Jump to content
SAU Community

Recommended Posts

I've tried to measure the offset of my stock R32 rims. It's a bit hard to be sure on the car but they seem to have 40mm offset.

If my 6.5" R32 rims are 40mm offset and Gtt rims are 7" would 35mm be near the ideal offset?

Does anyone know what the actual Gtt offset is?

They are 7.5 wide not 7.

Stock tyre size is 225/45/17.

Offset is roughly 35 front, 38 rear. - May want to double check that

Are you sure the offset is different front to back?

I bought a set of GTT rims today and they are all the same. The offset seems to be 39 or 40mm. It's a bit hard to measure to the mm with the tyres on.

From outside to outside the rims are 22mm wider than my 6.5" R32 rims so yeah, they are probably 7.5".

Anyway they look like a 100% legal upgrade for the R32 :)

Yes i was wrong about the offset. That was the offsets for 18x8 and 18x9 to fit my car. Nfi why i remembered at the time that they were stock offsets.

But yes they are most definitely 7.5 wide. Tyre placards etc state it.

I tried fitting them today.

Julzz was right, the fronts don't quite clear the TypeM caliper.

A 3mm spacer would fix it but aren't these illegal?

They only just touch as you fully tighten the wheel nuts.

Actually there would be plenty of thickness in the caliper to shave about 2mm off the edge that touches the wheel.

Is this too bodge?

  • 3 years later...
I tried fitting them today.

Julzz was right, the fronts don't quite clear the TypeM caliper.

A 3mm spacer would fix it but aren't these illegal?

They only just touch as you fully tighten the wheel nuts.

Actually there would be plenty of thickness in the caliper to shave about 2mm off the edge that touches the wheel.

Is this too bodge?

majority of people shave off the Nissan wording on the caliper, this usually gives enough clearance for the rims.

id prefer to do that instead of spacers, as spacers are illegal.

majority of people shave off the Nissan wording on the caliper, this usually gives enough clearance for the rims.

id prefer to do that instead of spacers, as spacers are illegal.

Mine didnt touch the nissan logo, it was far from it. It was hitting the whole edge of the caliper when the tyre was rotated.

  • 2 weeks later...

I have 34gtt rims on my 32gtst, they are 7.5" wide. I'm running 225s on the front and 245s on the back.

Initially had to run a 3mm spacer on the front as the rims bound up on the brakes, when I changed to 33gtst brakes this problem went away and I didn't need the 3mm spacer (there is barely 1mm of clearance though).

  • 1 month later...

I have fitted r34 gtt rims onto a r33 gtst with no problems at all.. No need for spacers etc

However it might be ideal putting 3mm spacers on.

offsets are 38 (so i have read on these forums in the past threads)

I dont see why it wont fit a r32.

They got smaller brakes right? compared to 33s? if so then will fit perfect

I have seen pics of 32s with 34 gtt rims :P

bubba- WOW you got 245s on a 7.5inch width rim?? how? lol

thought 235s would be the most..

Edited by siddr20
Mine didnt touch the nissan logo, it was far from it. It was hitting the whole edge of the caliper when the tyre was rotated.

Yup same here.

however, its like a mm off from touching.

Rims still rotate freely!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...