Jump to content
SAU Community

Recommended Posts

what is the in's and outs on these? and do they fix the coilpack  problems (4000-5000 popping) people get from there skylines???

theres a thread by someone that the is a hairline crack on the coil, if you tape that up it will stop the 5000 poping / boost cutting feeling.

also in that thread, someone argued that the power fc or was it a safc will resolve that problem too.

dont know if its true or not, so i will have a look at the coils this weekend and tape it, cause mine pops alot and cant keep up with the boys

were the $1000 prices in Aus for immediately available? Because the Nengun price may require 15% duty + 10% GST making it $750, and could take a couple of weeks sea freight. I guess people are often willing to pay more to get them sooner

Sounds like the stock coils are pretty weak.

Nope - just many years old and been through lots of heat cycles (ambient to maybe 80C). Given these conditions, I think that they survive pretty well!

After messing around with buying used coils, I went for the Splitfires to get rid of the missing once and for all. New coils from Nissan are actually more than the Splitfires.

Im Running 12psi - suffering the same problem both in my GTS-T and GTR both 93's. You could go a bosch external coil pack like I did on the GTS-T prior to selling. I then sufferd a problem with the Ignitor. I beleive 10-12 years and thats enough, time to replace.

Correct on the age and also having them down the centre of the valley there is continuos heat in addition covered over by the plate. You will see alot of Skylines with the cover removed. Only problem removing is water/moister sitting.

Very interested in the Splitfire. Perhaps a group buy from Nengun and we could get a heap at a more affordable price.

Mate they are PISS easy. All u need is an allen key to undo the 8 allen bolts on the black nissan cover on the top of the engine. Remove the intake piping by undoing the hose clamps. Take off the black cover, then unclip each harness from the coil packs. Undo another few bolts, and the 2 coil pack assemblies come off.

how difficult are these to install?

I'm a newby, best left to the pro's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...