Jump to content
SAU Community

Recommended Posts

Can anyone explain how the "on-demand" turbo boost works then?

Coz on our cars boost is driven by RPM.

no, not really, actually the wastegate controls boost on ths stock system.

And then of course many add an electronic boost controller that bleeds some of the boost the wastegate sees increasing boost again.

I would guess it is just some sort of electronic bleeder than increases the boost temporarily.

great feature for a race car tho, it really adds some strategy

Yeh it adds boost, but also changes the fuel and ignition maps so the car makes more power but suffers worse fuel economy:(

Yeh the Grp A days and turbos were great, but they never ran those sorts of boost levels for a race, two laps qualifying yes, but Pikes Peak Cars etc do it for the whole climb at high altitudes:) All impressive though:cheers:

I remember jim richards and the other guy who used to race the bluebird group A years ago getting interviewed on rpm on channel 10. They were talking about the tricks they used to use for qualifing like running stupid amounts of boost and using things like fire extinguishers on the intercooler when on boost to keep the intake air temps down, as there wasent such strict rules those days.

The turbos used to be scraped tho after running more than 2 bar boost boost rather quick even just for a few qualifying laps.

I remember jim richards and the other guy who used to race the bluebird group A years ago getting interviewed on rpm on channel 10. They were talking about the tricks they used to use for qualifing like running stupid amounts of boost and using things like fire extinguishers on the intercooler when on boost to keep the intake air temps down, as there wasent such strict rules those days.

The turbos used to be scraped tho after running more than 2 bar boost boost rather quick even just for a few qualifying laps.

Zoom magazine No 55 has an article on the Bluebird and mentions

"in race trim around 1.6bar (23.5psi) of boost, which is pretty good considering it's 19 years old. As for the qualifying set-up, I'll let Fred Gibson explain:"We just wound up as far as it (the wastegate)would go. It would probably be a bit under 3bar (44psi) and would be pumping out over 400hp (298kW+). It was good for one lap, then the turbo was junk." "

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...