Jump to content
SAU Community

Recommended Posts

hey guys, I have an Rb 25 in my ceffie, and just recently every now and then seemably at random my motor just shits itself and looses power stalls, but if im quick and flick it into neutral and rev it a little, it will keep going as long as I don't let the revs drop to idle.

Now this little siezure will last about 30s to a minute whilst I think my car is dead and im looking for a spot to bail by the side of the road. I pull over keep it going or even let it stall, then a min later and it will start and drive perfectly like nothing ever happened.

It doesn't matter whether the motor is hot or cold but it only started in the last two weeks or so in this wet weather so I think that may have somthing to do with it.

Has anyone had anything similar happen with their Rb25s? I also noticed these tubes coming from the head have a little oil in them for the first time ever and this problem started cropping up - not my engine in pic and my tubes are clear hose thats why ican see there is oil in them. I thought they were oil breather hoses so i figure this is probably fine, but if anyone can correct me please do so! :D

Its the only way I'll learn...

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/
Share on other sites

  • 3 weeks later...

I have EXACTLY the same thing happening to my RB20!! :confused:

I thought that it might be a f**kup when my immobiliser was installed, but now i'm not so sure. My immobiliser gets bypassed this wk so i'll find out then...

Gonna x-post this in the tech section for more coverage.

http://www.skylinesaustralia.com/forums/sh...656#post1105656

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1105657
Share on other sites

It seems to be a common issue with RB engines.......they tend to drop very low when you have come hard off the gas........i find by letting the vehicle slow down by braking against the engine will allow the system to sort itself out and remedy it.

Not uncommon. Someone once told me it was because of the GTR fuel pump.....not sure how correct that is.

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1105792
Share on other sites

i believe its something to do with the way the fuel pump is ground... one remedy is to re earth it to a better position or something... there should be a thread in the performance section related to it.

mine stalls all the time... but i dont have any BOVs lol

could also be something to do with the BOV... stock or aftermarket?

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1105813
Share on other sites

If it only happens when you give it a bit of full throttle or even just a bit of a push then completely come off the throttle then it is your BOV. If you have no bov or an aftermarket item then try going back to the stock plumback system. When i blocked off my blow off valve so i was running no bov this happened to me all the time, and after less than a week i gave up and put the stocko back on

This information may be completely irrelevant to your situation and i accept no responsibilities to anyones time that has been wasted

Thank you

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1105913
Share on other sites

on my rb25 i used to get it to stall when i put the clutch in for longer than a gearchange... was happening cos i wasnt running a bov... allowed to turbo to spin back the other way and it inst what the engine want, creates too much back pressure shuts down

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1106627
Share on other sites

Sorry to Hijack basket case. hopefully we can both get our RB's sorted :) glad it's not just me...

inark...I'll get my earth checked to my fuel pump (cause immobiliser was 3 point and included fuel pump).

Don't know about Basket Case but mine stalls at random. Cruising along a highway, cruising down the street. Slow decelleration coming to lights. and just like basket case, sometimes it'll start again straight away, and other times it'll take 3 mins to crank over again :(

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1107009
Share on other sites

remember this has only just started and has never been an issue before so it more than likely aint going to be the idle or timing...

just take it to be checked.

so your saying that the IAC valve(that controls the idle)cannot die?The timing check would also be a good idea...but make sure you have the correct procedure for your vehicle....ie some models you have to disconnect IAC valve/TPS

cheers

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1107457
Share on other sites

this sounds exactly like the problem i was having....imean still am having with my (KA24e)pintara im about to sell......i thought it might be the fuel pump ......sounds like it might be....considering the car doesnt have a turbo...!

it just sits there now while i drive the ceffy

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1107568
Share on other sites

  • 2 weeks later...

Hey! Woa, all these replies, I acually moved house so i have been without the net for a month - strange times for me...

I got an immobiliser installed a few weeks ago and got my custom turb manifold welded up coz it had a few cracks (thanks cef11e) and I was talkin to a mech about the idle (650RPM) and he assured me there was nothin to worry about with the ilde if it had been runnin' happily for 4 months like that.

Why im on the net at my local library now?

two days ago, :) the cef ran into so serious electrical fouls - It cuts out as soon as the motor warms up - Just cuts the fuel, pump the accel and it somtimes comes back and you can limp the car to a safe place to stop. Im guessing its a messed up temp sensor somewhere? which one who knows... I still get plenty of fuel pressure wich says its not a fuel delivery issue with the pump...

So 3 mechanics later and no one can figure it out - So im goin to shell out $$ getting it dyno checked by a perfomace mech with the right equipment to test the ecu. and hopefully all will be well again.

Thanks for all the replys! and I shoukd be a regular forumer in about a week when i get my new net connection hooked up!

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1123631
Share on other sites

Mine had the same problem and I use a head cleaners spray (for VHS players) on my AFM. Must be due to the HKS powerflow not blocking the dirt enough. After cleaning, pull my batt connectors out (to reset the CPU) then reconnect. Then start it up. Works wonders and car don't feel lag anymore.

Link to comment
https://www.sau.com.au/forums/topic/55512-random-issues/#findComment-1128002
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...