Jump to content
SAU Community

My GTR Thread

pentae

By pentae,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

pentae Mentor

pentae

Posted
  • Author
Posted

Hey Guys,

Its been raining all day today so I have not been able to get pics.. I am exhausted!

The mechanic report came back with:

- 165 to 168 psi across all 6 cylinders

- rhr axle oil seal leaking

- front upper inner bushes worn

- front and rear discs, pads, rotors need replacing

- front upper shock absorber bushes need replacing

- front caster bar bushes need replacing

I drove it around (on trade plates) for most of today and she drives very well, everything works, the air con will need regassing.

With a bit of effort I managed to remove both of the cup holders, unfortunately one of the vents was already broken and moves on its own, so i'm going to see if i can repair it with super glue when i take Gav's advice on fixing the bubble in the dash.

writeoff: Yeah! I feel your pain man. I spent most of today in prayer driving around like a grandma letting the car get used to functioning again.. I'm so glad everything seems okay because the spare cash i've had sitting around for the car has been burning a hole in my pocket for 6 months, and now that its finally here i'm a bit poor :rofl:

Its finally in the garage wooohooo!!

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

pentae Mentor

pentae

Posted
  • Author
Posted

Hey Guys.

I've got a major problem. :rofl:

I live on the top of a very steep drive way.. with not a great deal of runup. It's short and on quite an incline. I think its going to kill my car. :)

In a normal RWD'er with enough balls, (or even the old pulsar gtir) I can kind of point it up there, give it a bit of revs, let out the clutch completely at the bottom and storm up the top. (This is the ideal way to do it without burning out my clutch)

I've realised that with the GTR and ATTESSA it kind of bogs down on the low end on anything below about 4000rpm, the poor car putts up the driveway and is either burning the crap out of my (a) clutch (B) transfer case © gear box .. or maybe all of the above. It smells bad.

if I give it enough to do a proper launch i can still smell the clutch burning, so either way i seem to lose.

The only solution I can think of, is tommorow i'll try taking the 4wd fuse out and see how I go, and rely on a bit of clutch slippage at the bottom.

I'm probably still getting used to the car but having to rev over 3,500rpm every time I want to go up my driveway seems excessive, and I dont want to damage the transfer case.

What do you guys think?

pentae Mentor

pentae

Posted
  • Author
Posted

LOL..

Yeah, If RWD doesnt work i'll be packing the end of this week .. parking on the street? inconceivable!

Mark: Btw, Thanks mate, hows your girl these days? :rofl:

Also, is there anything else I have to do other than pull the 4wd fuse? Anything that can happen that I should be wary of?

NXTIME Grand Master

NXTIME

Posted
Posted

pentae: No need - just leave it hooked up and reverse the car down when you leave ;) Just don't forget to unhook it before you tramp it up the street! :P

it will be at the bottom of the driveway when you get home ;)

PS, could be also used as an anti-theft device for an unwitting thief :)

pentae Mentor

pentae

Posted
  • Author
Posted

Nxtime: Damn, that would actually work.

But i'd still need to get out of the car ;)

Can anyone please tell me if I can pull the 4wd fuse out / put it back in, while the car is running, without damaging anything?

I dont know enough about auto electrics to make my own decision.

I think I might just get a simple toggle switch.. for AWD on / off.. I dont care too much about adjusting the drive split.. I just want an on off switch. Surely this can be done by an auto electrician fairly cheaply? Does anyone else have a toggle switch? Can it be used while driving?

Thanks everyone..

edit: ps. More pics in a few hours! :D

pentae Mentor

pentae

Posted
  • Author
Posted

Hey Guys,

Click Here FOR 12 PICS I took of the car after a clean!!

I love this car. I'm still bummed about having to wait 6 months, but i'm happy with the end result.

Can anyone tell me what the damn thing mounted where a turbo timer normally sits in picture 2 is? Its obviously got something to do with the stereo that used to be there.

It says Panasonic on it. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...