Jump to content
SAU Community

Recommended Posts

Ok at the moment my 'line is dead stock in terms of rice.... and by spending as little as possible, I want to give it that "Japanese" look. I'm not after "pure rice" and I don't want to cover the car in stickers, I just want something to give it a little extra street credit :headbang:

All the skylines in Japan that I see on the net look kind of different from the ones you see here, so what do they do that we don't?

I have so far thought of the following:

- super dark tinting

- jap brand body kit (too expensive for me though)

Got any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/5584-how-to-give-the-line-that-jap-look/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Have stickers like...

"Street RACING"

"GOOD ROAD"

"MUFFLER"

"FAST CAR"

"THUMBS UP" etc..etc.

These are actually cover the JAP cars I've seen on Videos...1st time I saw them I scratched my head for while?!?!?:(

or for the true Jap ricey car cover your half windscreen with the stickers that does not make sense...

me two cents

cheers

Joe

Originally posted by nissaner

actually... i think i saw a copy of the bronze RAYS on a black my02 wrx... it was in hot4s... would be alot cheaper than the original.

nissaner what do the ones u mean look like?

if u want "street cred" as u put it... how about doing some power mods rather than making it look like a tiger when its really a kitten

ROFL i agree, so many ppl make it look hot when its a stock dog box "NO Offence m8" engine mods would be a better mod i reckon than poxy stickers. Or u could always go buy a FORD or a LEYLAND, HAHAH ROFL

Guest Boxhead
Originally posted by RONIN

Jap bodykit, C-West T-Wing, Rays TE37's in white, Cup-holder in the vent, and a few stickers down the drivers door (say HKS, 5Zigen, C-West, Trust etc...)  

Now that's jap!!!!!

awww you know the ones i want, i saw em like, 2 months ago on yahoo japan auctions, 17 inch, white, $600 aud, but getting em here is the problem.. but damn there sexy

Originally posted by jmp

-- get some fullsik neons

-- get some mugen stickers and maybe a 'vtec inside' sticker

-- get a doof doof system

You forgot a "type-r" sticker, one of those fake blow off valves for N/A cars, fake fuel filler, oh and of course the 'sik' wheel lights :(

I don't want rice!!!

I just want to make it look more 'oriental'....LOL I don't think some people understand what I mean by that

I like the cup holder in the air vent idea, you see that on heaps of jap cars!!

whack on stickers like..

' super fun turismo movement'

'racing dream flow power '

and crap like that. hehe :-)

but if you want real street cred.. put a cage in it!

NOBODY runs me unless i initiate it and she's a bog stock 32 enginewise so theyll most probably blow me away. The best thing is she handles like a dream :(

Shaun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This is for an RB20DET. Sorry for not including that. 
    • Welp, this is where my compression lands after my rebuild. Thoughts? I have ~6 hours on the motor. 
    • Well, after the full circus this week (new gearbag, 14 psi actuator on, injectors and AFM upgraded, and.....turbo repair) the diagnosis on the wastegate is in. It was broken. It was broken in a really strange way. The weld that holds the lever arm onto the wastegate flapper shaft broke. Broke completely, but broke in such a way that it could go back together in the "correct" position, or it could rearrange itself somewhere else along the fracture plane and sit with the flapper not parallel to the lever. So, who knows how and when exactly what happened? No-one will ever know. Was it broken like this the first time it spat the circlip and wedged itself deep into the dump? Or was it only broken when I tried to pry it back into place? (I didn't try that hard, but who knows?). Or did it break first? Or did it break between the first and second event of wierdness? Meh. It doesn't matter now. It is welded back together. And it is now held closed by a 14 psi actuator, so...the car has been tuned with the supporting mods (and the order of operations there is that the supporting mods and dyno needed to be able to be done first before adding boost, because it was pinging on <<14 psi with the new turbo with only a 6 psi actuator). And then tuned up a bit, and with the boost controller turned off throughout that process. So it was only running WG pressure and so only hit about 15-16 psi. The turbo is still ever so slightly lazier than might be preferred - like it is still a bit on the big side for the engine. I haven't tested it on the road properly in any way - just driven it around in traffic for a half hour or so. But it is like chalk and cheese compared to what it was. Between dyno numbers and driving feedback: It makes 100 kW at 3k rpm, which is OK, could be better. That's stock 2JZ territory, or RB20 with G series 550. It actually starts building boost from 2k, which is certainly better than it did recently (with all the WG flapper bullshit). Although it's hard to remember what it was like prior to all that - it certainly seems much, much better. And that makes sense, given the WG was probably starting to blow open at anything above about 3 psi anyway (with the 6 psi actuator). It doesn't really get to "full boost" (say 16 psi) until >>4k rpm. I am hopeful that this is a feature of the lack of boost controller keeping boost pressure off the actuator, because it was turned off for the dyno and off for the drives afterward. There's more to be found here, I'm sure. It made 230 rwkW at not a lot more than 6k and held it to over 7k, so there seems to be plenty of potential to get it up to 250-260rwkW with 18 psi or so, which would be a decent effort, considering the stock sized turbo inlet pipework and AFM, and the return flow cooler. According to Tao, those things should definitely put a bit of a limit on it by that sort of number. I must stress that I have not opened the throttle 100% on the road yet - well, at least not 100% and allowed it to wind all the way up. It'll have to wait until some reasonable opportunity. I'm quite looking forward to that - it feels massively better than it has in a loooong time. It's back to its old self, plus about 20% extra powers over the best it ever did before. I'm going to get the boost controller set up to maximise spool and settle at no more than ~17 psi (for now) and then go back on the dyno to see what we can squeeze out of it. There is other interesting news too. I put together a replacement tube to fit the R35 AFM in the stock location. This is the first time the tuner has worked with one, because anyone else he has tuned for has gone from Z32 territory to aftermarket ECU. No-one has ever wanted to stay Nistuned and do what I've done. Anyway, his feedback is that the R35 AFM is super super super responsive. Tiny little changes in throttle position or load turn up immediately as a cell change on the maps. Way, way more responsive than any of the old skool AFMs. Makes it quite diffifult to tune as you have to stay right on top of that so you don't wander off the cell you wanted to tune. But it certainly seems to help with real world throttle response. That's hard to separate from all the other things that changed, but the "pedal feel" is certainly crisp.
    • I'm a bit confused by this post, so I'll address the bit I understand lol.  Use an air compressor and blow away the guide coat sanding residue. All the better if you have a moisture trap for your compressor. You'd want to do this a few times as you sand the area, you wouldn't for example sand the entire area till you think its perfect and then 'confirm' that is it by blowing away the guide coat residue.  Sand the area, blow away the guide coat residue, inspect the panel, back to sanding... rinse and repeat. 
×
×
  • Create New...