Jump to content
SAU Community

Recommended Posts

Originally posted by adam 32

i had 4 of them in my car when it came over from jap, and i managed to break every A/C vent getting them out. why dont jap car manufacturers just DESIGN CUP HOLDERS!

on that note.. in the R32's, the thing in the centre console behind the gear stick.. is that a cop holder when you pull the flap up and lock it in?

thats the only thing i can think it is.. cans fit ok, but not perfectly.. stupid design if it is though..

Shaun

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

Originally posted by tlai909

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

Pardon me? are you blind mate cos last time i looked i hadnt bought a GT wing for my car.

As for stickers everywhere id love to know how 5 small black decals down my door classifies as "stickers everywhere" - you obviously havent seen GTR80Y :uh-huh: (no offence loz) :(

Originally posted by adam 32

i duno. mine doesnt have a flap.... everyone puts the phones in there in my car

yer same.. but a thing folds up *shrug*.. ill take a pic of it sometime. probably is just a weird cup holder.

Shaun

Originally posted by tlai909

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

you say 'jap' like its a bad thing :P

loz is the perfect example of the jap look! :P

gtr80y looks like its going fast even when its parked lol :)

when he was over at my place in the garage of my units, one of my neighbours walked past and went "oooooh going racing are we boys?" :lol:

<rant>

nothing says jap more than a see thru plastic phone holder and matching cup holder jammed into your center a/c vent to the point where the fokin thing crumbles the moment you pull it out and have to wait for years to meet up with OOHSAM to get a replacement one.

Then there's the tissue dispenser thingy in a bamboo box.

And MD/CD Double DIN player with purple (why purple always?) led display.

A pingu thingy somewhere in the car.

Some sort of ioniser thing which creates ozone molecules that bind to smoke particles and neutralises them.

Brace pads on either side of your knees (if youre captain dorifto)

A HKS guage readout thingy in your glovebox which conceals itself when the glovebox is closed (this is very nifty actually, coz u the gauges are there only when u need em)

A Sat-nav thing which again makes no fokin sense except in kanji which sucks coz you can't read anythign but harigana. And the manufacturers never imagined the car ever leaving Japan and don't sell any plugin modules for any other country except korea.

An HKS or Blitz airbox or air filter.

A sticker that says your a member of the Japanese Automobile Community or sumfin (with either 3 to 5 skulls or a dog with a thumb up)

A jap number plate and a authentic Nissan Skyline Jap numberplate surround

A numberplate relocator for the front bumper to allow more air into your FMIC

A emergency toolkit that includes a white flag which you tie between your car and the car towing you or being towed by you so no Japanese men on bikes or on foot try to go between the two fo you.

Oh and the most important one, the Round sticker on windscreen with a big number that tells you what month of what year the car was registered on.

And a couple of other stickers for jap parking permits and automoticve clubs, stickers for every friggen garage that services your car including the local petrol station. And an ETC card to allow you access to something or other jammed way into the recesses of the driver side sun block flappy thingy.

</rant>

oh and if you wanna look dorifto l33t then apply a shitload of bog to the corners of your car, esp the rear corners, don't bother smoothing it out... whack it on and scrape it off in the general angle of the panel.

then apply a shitload of bog to the corners of your car, esp the rear corners, don't bother smoothing it out... whack it on and scrape it off in the general angle of the panel.

did you think of this just now or have you done this before eh :P

when i was in the process of respraying my 180, there was a stage that the whole back half was in pink spray putty, after all the back was straight and i hadnt moved up to the doors yet, the doors forward were black still.

I went through a maccas drive through and it was a classic, the guy said,

"been doing a bit of drifting eh mate?"

i wish i had a pic of all the stages my car has been in, it looked like a jap accident.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...