Jump to content
SAU Community

Recommended Posts

On a stinker of a day this result was achieved:

IMG_0478.JPG

Mods are:

- 3" turbo back exhaust

- hybrid fmic

- pod filter (not enclosed and was sucking alot of hot air)

- bleed valve set to ~11.5psi

I know there will be skeptics, but UAS are a very good workshop and I'm sure alot of people here can vouch for them. The car is incredible to drive and response is magnificent.

The only problem is.... it's addictive I now want ~ 280kw at the wheels haha

Link to comment
https://www.sau.com.au/forums/topic/55961-r33-gtst-dyno-results/
Share on other sites

Yours isn't doing the weird crap mine was doing high up in the rev range too. Series 2 as well yeah?

cause whoa... your car's got some power there. You made about 30rwkw more than my car with the same mods!! Same front mount too, and your intake temp is 10 degrees higher!!!!! :P hehehe

My timing is stock @ 15degrees... How the? what the? LOL :D great result dude. :D

mate what happened to the RUF tune

They only knocked the CAS at a 'guess' to overcome 100kw and get a peak of 169.1kw and didn't bother doing anything else with it.

Today John and the boys at UAS played around with it having around 20 runs on the dyno and thats the figure I achieved, they played around with air flow meters and bleeding off fuel to overcome the too rich problem but the power figure as is now and in road condition is slightly over 200kw.

PowerFC and HKS2530 here I come! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...