Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Hi all i am after 2 of these pocket bikes i want the bigest ones you can get i would like a harley or the road bike just after some prices thanks or some info were to get them from cheap i'm in melb

I went to savedirect today... saw some of their goods. This guy was riding a yellow pocket bike and full speed up and down the street, looked mad. He told me the one he was riding costs $800, 49cc Air cooled, Key ignition, Max speed of 60kmph.

What do you guys thik of em?? Reliable?? or a total waste of money?

save direct dont have the best quality bikes.

I just picket this up yesterday ;)

http://www.ozbikes.com.au/browse.php?actio...15&categoryID=1

Which is the new 4 stroke 70cc ones

But i got it for a better price than that advertised.

This thing hauls ass and is alot bigger than the 49cc mini bikes you can get. The speedo reads to 60MPH and riding around my court and nearby park i had it to around 45MPH (72km/h) at the start of 4th, but wasnet going flat out coz for the first few tanks of fuel you need to run the engine in!!!

With the 4 speed semi automatic (clutchless) you can shift at full throttle and it will pop the front wheels in the air in every gear change.

Will get pics of it tonight.

damn that looks nice... but i heard that anything bigger than 49cc needs to be registered or you need a license??

What the deal with your one?

Mate if you know me you would know i dont care about little details like that ;)

It looks like the biggest 49cc bike and i only ride in in the park and on deserted roads.

Hey mate how much did you pay for this bike if you dont mind telling me i have been looking on ebay and been to a few stores but they variy so much in price and most of them look the same. anyone know were to get a good cheap one from thanks

Not yet but close, once nearly head butted a car turning into my court and another one hit a pot hole on a foot path in the park at about 70 km/h and went off on the grass but stayed on the bike, luckly it has hydraulic suspension otherwise it would have ended in tears!!!

is it more fun to drive than your skyline? :D

Na, it a total different type of experience!!

martydaman

Since cops still think a bov has something to do with the exhaust then they are not going to know the difference between a 49cc and 70cc bike!!!

plus i know sfa about bike engines either!!

martydaman

Since cops still think a bov has something to do with the exhaust then they are not going to know the difference between a 49cc and 70cc bike!!!

plus i know sfa about bike engines either!!

Good point, is the 70cc model bigger than the 49's?? coz im not buyin one of those puny ones where your knees can smack you in the face whilst racing

Finially got some pics of the bike last night after i changed the oil to some full synthetic 4 stroke oil!!

Rode around for about 3 hrs on sunday with 2 mates with 49cc mini bikes in local industrial estate with long straights and fast corners and even with my heavy carcus kicked their asses easily. Most times on the long straights i could pull around 15-20 bike lenghts on them, they would catch me a little in the corner coz my bike is double the weight of theirs and not as easy to turn, and the fact that i was going nearly double the speed of theirs into the corner before braking, and i was hitting speeds of near 85-90km/h down the main straights.

The 4 speed gearbox makes such a difference and the 70cc engine has so much more torque and top end than the 49cc ones, and 1 of the 49cc ones had a few modifications, and mine was 100% stock!!

I am looking at some modifications for mine but since the bike is new on the market most of the available parts for my engine are only in the USA. There is a supercharger kit for the 4 strokes available in aus which at 8psi gives 10hp power gain. That would make my bike total about 14KW and weigh with me on board around 135kg.

Word to the wise:

When someone crashes the bike your about to ride just before you venture out onto the track on it, remember to make sure the tank/seat/tail assembly is still firmly attached to the frame of the bike.

I low-sided BADLY last night with the throttle pinned wide open coming out of a fast right hander onto the back straight at my local go-kart track. Tank/seat/tail assembly fell clean off and me with it!

My knee and elbow hurt real bad!! :)

Fark it was fun though!!

Adrian

I have already come off once on sunday in the industrial estate trying to take a left hander to fast and with the back wheel locked trying to slide through the corner, and only scraped the right hand side fairing a bit and added a small crack to it also. I only got a slight scratched elbow. 1 of my friends on the 49cc mini bike tried to pop a mono and ended up flipping the bike and scraping the whole back of his bike and denting the exhaust muffler and having bleeding elbows and knees for his effort!!

Of course we stood there laughing at him for about 5 mins before we went to see if he was ok :)

I think you guys should start wearing leathers man....

then, start to lean like Rossi... with knee... would look rather hilarious on photo :headspin:

I have already come off once on sunday in the industrial estate trying to take a left hander to fast and with the back wheel locked trying to slide through the corner, and only scraped the right hand side fairing a bit and added a small crack to it also. I only got a slight scratched elbow. 1 of my friends on the 49cc mini bike tried to pop a mono and ended up flipping the bike and scraping the whole back of his bike and denting the exhaust muffler and having bleeding elbows and knees for his effort!!

Of course we stood there laughing at him for about 5 mins before we went to see if he was ok :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...