Jump to content
SAU Community

Recommended Posts

Hi guys.. just registered :rant:. I have just purchased a R34 GT-T (Not my first skyline i had a non turbo r33 95 skyline) My question is in regards to the boost setting for the standard neo turbo just for street use. The mods on the vehicle atm are minor just cat back 3 inch exhaust, bov, and airpod. I need to know what boost is recommended and what boost not to exceed etc. I also want to put a front mount intercooler on and possibly get the turbo highflowed does anyone know of any good reliable shops in the brisbane area that can do these mods. Thx for your time guys.. no doubt ill have heaps more questions as i learn more about the RB25DET.

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/
Share on other sites

the compressor wheel is plastic or ceramic (unsure) and will get angry over probably 12psi. Try it at say 11psi and see how it goes. The stock ecu will have boost cut limits etc but it wont prevent ceramic compressor wheel failure due to heat from the excess boost. You should get good response from 12psi, pod filter, exhaust and intercooler easily 200rwkw i'd say

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1109157
Share on other sites

Thx for your help.. The turbo engine is a completely new world for me. Im not even familiar with the boost controller atm. Going from the non turbo 33 to the GT-T is awsome .. such a massive difference in power. Im aiming for a 250 rwkw after the highflow and intercooler. The last thing i want to do is blow something cause ive upd the boost to much. Thx again

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1109266
Share on other sites

Turbowns,

Firstly, congrats on an awesome step up, R34's rock!

Boost, many claim that all it can handle is about 12psi, I have been running 14odd for over a year no probs, however std boost on mine is about 11. Be careful because the turbo is ceramic/nylon. Make sure you get FMIC before playing with boost too much (and turbo back exhaust) or you will seriously risk f%&king your turbo.

Can't comment on hi-flowing turbo as I have heard conflicting stories.

As you mod the R34 more the first thing that will annoy you is boost/fuel cut, a safety measure to prevent overboosting/detonation. Regardless of mods the only way you will get the car above about 200rwkw's is by changing or piggybacking the ECU (ie Emanage/PowerFC etc). I believe to get to 250rwkw you will also need turbo back exhaust, FMIC, ECU mod, fuel pump and injectors if not more.

I have heard good things about 101 motorcafe, particularly for ECU work. Give them a call and they should be able to guide you through the whole process, alternatively on the GC try Autech (Gavin Wood) in labrador.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1109629
Share on other sites

Turbowns,

Firstly, congrats on an awesome step up, R34's rock!

Boost, many claim that all it can handle is about 12psi, I have been running 14odd for over a year no probs, however std boost on mine is about 11. Be careful because the turbo is ceramic/nylon. Make sure you get FMIC before playing with boost too much (and turbo back exhaust) or you will seriously risk f%&king your turbo.

Can't comment on hi-flowing turbo as I have heard conflicting stories.

As you mod the R34 more the first thing that will annoy you is boost/fuel cut, a safety measure to prevent overboosting/detonation. Regardless of mods the only way you will get the car above about 200rwkw's is by changing or piggybacking the ECU (ie Emanage/PowerFC etc). I believe to get to 250rwkw you will also need turbo back exhaust, FMIC, ECU mod, fuel pump and injectors if not more.

I have heard good things about 101 motorcafe, particularly for ECU work. Give them a call and they should be able to guide you through the whole process, alternatively on the GC try Autech (Gavin Wood) in labrador.

Cheers

Ok what is FMIC?

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1109664
Share on other sites

What year/month is your 34?? If it is a late 2001 (Series 2) onwards you may find that the turbo is metal/metal.

There is a detailed thread on this site about the differences between r33-r34. Here it lists a guide on how to find exact details of your car.

Hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1110151
Share on other sites

What year/month is your 34?? If it is a late 2001 (Series 2) onwards you may find that the turbo is metal/metal.  

There is a detailed thread on this site about the differences between r33-r34. Here it lists a guide on how to find exact details of your car.

Hope this helps.

Its a 1998 model series 1

Link to comment
https://www.sau.com.au/forums/topic/57509-newby-help/#findComment-1110258
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...