Jump to content
SAU Community

DR30 & R31 Jap Tail Lights

TUFSSS

By TUFSSS,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted
Hi Guys,

I'm trying to find out what a pair of tail lights are worth and how hard they are to find for these two models skylines.....

The ones I'm talking about are the jap spec ones different to the ones we saw here.....

Are they rare?  Expensive??

Cheers,

Simon

Jap Hr31 tails lights are getting very hard to find indeed, and would fetch a fair price (guess around $170-$200 per light)

Don't know about the Dr30 taillights, but would expect them to be harder to find and most likely more expensive aswell.

SKY031 Grand Master

SKY031

Posted
Posted

There's quite a few people who have given up on getting the old school hotplates for their 31's... If you are thinking about getting a few sets sent over, make sure you get the centre garnish as well. :(

I don't think you'd have much trouble selling them provided they are in reasonable condition.

rsx84 Veteran

rsx84

Posted
Posted

the late model dr taillights are similar to the S3 r31 ausi taillights ( dr30 ones don't have the smaller section for the indocators and reverce lights at the bottom) next to imposible to find here, the earlier ones the stove tops ones are not quite as hard to find and i wouldn't pay more than $200 for a set unless they were brand new, hint hint....thats what the stove tops look like at night? sort of the like the passage lights pictured about...

rsx84 Veteran

rsx84

Posted
Posted

damm and i have no money at the moment its always the way... TUFSSS, if your mate can get late model DR ones in that condition at about the same cost them i'd say there would be a few of us here alone that would jump at the chance!

Angry Proficient

Angry

Posted
Posted

i bought a pair of HR31import lights not long ago ...simply coz tehy were cheap ..but i'm not a fan ..i ended up swapping them for a good pair of Ser3 31 lights instead...

i paid 210bucks including the center garnish and postage from brisbane for them.

Boof Mentor

Boof

Posted
Posted
I've seen the DR30 ones with the two round circles inside the squares, are these local or JDM?????

All DR tail lights are JDM, i beleive the ones you are talking about there are the S1 tail lights...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...