Jump to content
SAU Community

Recommended Posts

Talk to Brett at GCG, I was quoted $1950, actual cost $1169.40 including postage and insurance [which I requested].

I removed and replaced the turbo myself, you also have to replace the coolant, and oil + filter, so add $100.

No, don't know them at all.

Don't exactly know what they did [how much can they do other than hiflow and bearings]. There is only one stage = hiflow, there are no extra stages, they don't have different levels of performance.

Went from 51.2/71mm to 56.3/76mm, had ball bearings already, so didn't need converting, just new bearings. And then bigger [obviously] props.

I just bolted it straight back on and used it [getting a power fc and a remap coming up, but still works fine till then].

And as far as I know, it was a std GTS-t turbo, I rang and asked Brett about it, and he said it was bog stock and in good condition [i wanted more power and extra reliability + efficiency]. He couldn't tell me how much work it had done. I know the turbo has been off before, the oil and water pipe brackets were disconnected, and I don't think it would leave the factory like that.

You won't get sh1t for $1200. Some clapped out peice of garbage that needs major mods to fit.

For a hiflow, you get basically a brand new [yours cleaned up and refurbished] turbo that is easily capable of 250rwkw, plus it bolts straight up, no mods needed, everything fits.

Unless you want something that is undriveable on the open road, and a stressed out 2.5 motor [i know, I know, it can be pumped up more], the hiflow is a win win option.

I didn't want a race car, or a 300+ fuel guzzlin' beast, the hiflow suited me.

Can someone else confirm that it actually is 1200? because I remember reading other posts on here, that people say it's around 1850 depending on what's done.

For 1850, i'd go off and get something else, but for 1200, definitely a highflow. If someone else can confirm that GCG does it for 1200, I might go get it done.

Do also remember that in the case u get EPA'd the stock highflowed turbo wont bring much attention, whereas with the aftermarket turbo ur asking for trouble. Thats just another point to consider.

BTW i was quoted 1500 to highflow my turbo, not sure how much it is in Sydney tho.

I have used several GCG ball bearing hi flows and never had a problem, they make the power and obviously fit up perfectly. If you add in ALL the costs, the hi flow is very hard to beat.;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...