Jump to content
SAU Community

R32 gtst 92 with rb26 not your average car

meggala

By meggala,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

meggala Grand Master

meggala

Posted
Posted

ok selling for a mate not posting for a mate so contact me for more info

has full compliance

r32 1992 fitted with rb26 tuned rom ecu vpc

100 mm cooler

660 injectors

fuel system upgrade not sure on spec's but good for 400 rwkw

twin plate clutch 75-80% Left

rb25 box with gear set and quick shift

2way or locked diff not sure but assume 2 way

drag suspension great weight transfer etc

line locker

17" wheels

very clean body we assume one owner in japan

defiantly one owner here in oz

probably more mods but that should do for now

car was built in japan by garage endless

ok this car was brought in with a mental motor full house rb26 with twin 2835r pros any way the owner got sick of the set up and swapped the old motor for an rb 26 from a 1997 gtr in its current for the car has made 250 rwkw @ around .8 bar its a great car with a good reliable package.

it needs a bit of sorting and reg the owner is o/s.

the car starts first time every time idles fine and drives great

slime @ meggala.com the car is in melbourne freight no problem etc

serious enquirys only

low 20k mark

this is a 92 model not an 89 its a great package with good interior and exterior

meggala

ther32side1.jpg

ther32stick1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...