Jump to content
SAU Community

Recommended Posts

Hi,

Just joined the forums to get some advice.

Been looking for a new car for a short while after spending several years and way too much money on V8's, and after driving a few different cars have my heart set on an R32 GTS-T or GT-R (obviously more expensive)

My budget is about 15K but could go to 25K for the right GT-R, but to be honest would rather stick around 15K.

What are my options here guys? It seems I could import an R32 GTS-T and have a bit of change of a few mods for the 15K - does this seem attainable or am I dreaming? If so what are the things I should look out for in these models apart from the obvious things.

Performance wise im happy to just get used to the car first before wanting to wind up boost and stuff like that, Ive had enough experience driving V8s for many years (im 30 btw) so inexperience with handling fast cars isnt an issue, but having said that, is always good to get back to basics with different engine configs.

sorry for rant , but for any helpful advice I would be grateful.

thanks..

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/
Share on other sites

Guest two.06l
']Hi,

  Just joined the forums to get some advice.

Been looking for a new car for a short while after spending several years and way too much money on V8's, and after driving a few different cars have my heart set on an R32 GTS-T or GT-R (obviously more expensive)  

My budget is about 15K but could go to 25K for the right GT-R, but to be honest would rather stick around 15K.

What are my options here guys? It seems I could import an R32 GTS-T and have a bit of change of a few mods for the 15K - does this seem attainable or am I dreaming?  If so what are the things I should look out for in these models apart from the obvious things.

Performance wise im happy to just get used to the car first before wanting to wind up boost and stuff like that, Ive had enough experience driving V8s for many years (im 30 btw) so inexperience with handling fast cars isnt an issue, but having said that, is always good to get back to basics with different engine configs.

sorry for rant , but for any helpful advice I would be grateful.

thanks..

Buy what you can afford to maintain/modify, just because you can afford to buy a GTR does not mean you necessarily can afford to maintain one.( these cars arent very kind to your wallet).Paul...DIRTgarage.

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119592
Share on other sites

Guest two.06l
']good point, im not really looking for something I want to throw endless amounts of $$$ at, been there done that with the V8's.

The GTST seems a good option then - so for 15K am I thinking sensibly?

Yeah for the money you could get a great ride and afford to throw a bit of mod. money into it. Rule of thumb is try and buy the cleanest unmodified example you can find.

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119599
Share on other sites

Thanks mate for your prompt replies.

Import wise, what are some reputable companies to deal with that have websites etc?

Ive seen j-spec and prestigemotorsports, just curious if there is many others out there. (I have looked a little, but admittedly havent searched to much)

Sorry for the questions, but I was told this forum was really helpful and it seems that way - just want to get all the info I can before i jump in the deepend...

cheers

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119602
Share on other sites

Guest two.06l
']Thanks mate for your prompt replies.

Import wise, what are some reputable companies to deal with that have websites etc?

Ive seen j-spec and prestigemotorsports, just curious if there is many others out there. (I have looked a little, but admittedly havent searched to much)

Sorry for the questions, but I was told this forum was really helpful and it seems that way - just want to get all the info I can before i jump in the deepend...

cheers

we looked at 12 GTRs before buying the one we did. Takes a bit of leg work but you will be rewarded in the end. Just start looking be prepared to walk away from a car your not completely happy with.

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119605
Share on other sites

I'm with Paul & Stacey(of DIRTgarage fame/infamy!)-most sell their souls just to afford a GTR-but they're an older car(or at least the 32's and 33's are)-something will not be right,and it'll cost big to fix usually.If a car that retailed here in Oz for $110,00 can be had for low to mid 20K,I'd say that is giving you fair warning it wont be right from the start!My 32 cost a reasonable amount more and,whilst in better overall condition than most,still needs some TLC in places.Spring for the neatest,unmodified example of a GTS-T(four doors seem to be better value...hint,hint)and spend the extra dollars making it stop and handle(power comes later-no good without the first two things).There's my 2c worth!Good luck,and happy Skylining!

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119615
Share on other sites

i just bought an 89 r32 gtst for 12k the only real problem with it is it needs some body work but 1.5 -2 k should have it lookin good the interior is spotless for a 15 year old car and its only got 85000 ks on it but i think it was a case of being in the right place at the right time for my car all the others i have seen are around 18k

Link to comment
https://www.sau.com.au/forums/topic/58411-r32-advice/#findComment-1119616
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...