Jump to content
SAU Community

Recommended Posts

My car has just started to make a loud clicking sound from the steering column when i turn it left and right.. the steering wheels seems to be very tight with no play it is at all.

Does anyone have any idea what this could be? im starting to get worried about it....

thanks

Link to comment
https://www.sau.com.au/forums/topic/58489-loud-click-from-steering-column/
Share on other sites

Is it a four wheel drive? and does it get louder when you turn full lock and accelerate?

If not then see if it does it louder when you are parked and turn the wheel from full left to full right and back again. Does it sound like it is coming from inside the car or outside moreso?

If it's inside then it could be the column itself or the switching mechanism for the indicator. (Have you recently changed a steering wheel or something?)

If it outside the car then check the column coupling where it joins into the rack.

Also check the HICAS sensor under the steering wheel.

its and R33 GTST and it sounds like it is comming from right behind the steering wheel. i havent really noticed if it is louder stationary or in motion. I have not touched the car or steering wheel at all, but it is quite loud..

Does anyone have any idea of how to check out the steering column? it has an airbag..

See if it does it gets louder when you are parked and turn the wheel from full left to full right and back again.  

That is the worst bit of advice I have seen in a long time.....

Don't turn your wheels while the car is stationary.

It puts massive load on the power steering pump, and it's not good for your tyres either. :P

My money says it's the indicator switch making the noise. :P

That is the worst bit of advice I have seen in a long time.....

Don't turn your wheels while the car is stationary.  

It puts massive load on the power steering pump, and it's not good for your tyres either.   :thumbsup:  

My money says it's the indicator switch making the noise.  ;)

Good on ya mate.

It will only hurt the pump if you continuously do it. There is absolutely nothing wrong with doing it once or twice.

I have never seen a pump fail due to this test and it is necessary to determine its location. It also helps by putting the load on the pump as it will amplify any problem that is present. It also rules out any moving components whilst driving.

And in case you didn't notice I am offering help to people here unlike you. I already told him to check the switching device for the indicator so instead of repeating my advice and then flaming bits you know nothing about. Think before you type.

ok settle guys......hahaha that thread was funny !

anyway erhmmm

i have the same problem .

description;

clickin noise comin from outside from left hand side of car. Definelty outside the car and ft left.

only when u turn the wheel then the nosie is apparent. like a few clicks at time.

the bushes look fine ........so perhaps the column couplin ? hmm

ok settle guys......hahaha that thread was funny !

anyway erhmmm

i have the same problem .

description;

clickin noise comin from outside from left hand side of car. Definelty outside the car and ft left.

only when u turn the wheel then the nosie is apparent. like a few clicks at time.

the bushes look fine ........so perhaps the column couplin ? hmm

Is it a rapid click or just a few spaced apart. Plus is the noise only apparent when you are moving slowly or does it make when you are doing say 60 around a bend.

Has your car been lowered?

How does it handle, does it drive ok normally? (ie:do you think the noise effects the driveablility of the vehicle?)

Check bearing plates

Check spring saddle

Check steering rack mounting bushes

You should check balljoints but I would doubt these would be the problem, they would knock rather than click.

  • 1 year later...
Is it a rapid click or just a few spaced apart. Plus is the noise only apparent when you are moving slowly or does it make when you are doing say 60 around a bend.

Has your car been lowered?

How does it handle, does it drive ok normally? (ie:do you think the noise effects the driveablility of the vehicle?)

Check bearing plates

Check spring saddle

Check steering rack mounting bushes

You should check balljoints but I would doubt these would be the problem, they would knock rather than click.

noise happens when stationery and u turn the wheel.

even more loud when u are parked on a road slanting in the gutter. (hence more weight on tyre)

i think its the balljoints...if u move the front left tyre side to side while jacked up and it moves somewhat does this mean the balljoints are worn out?

please assist me in this synopsis.

only under load the clicking comes from the front left.

where and how much do the balljoints cost?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Got the gearbox in and the front drive shafts.
    • Hi There I went through a rabbit hole of reading about Xenon headlights and the ADR regulations for having them installed. As people have been defected by running factory xenon I was researching in ways to make them compliant. Everyone always say needs to be self leveling and have washer installed, which I don't necessarily agree with. For this argument I'm using R34 as reference as I'm more aware on the construction of the headlight compared to the R33 Xenon, which may still be the exact same case.   For the self leveling clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles As you can see the bold text "these manually adjustable devices from driver seats" are fine to use. As Series 1 Xenon model headlights do have a 4 level adjuster on the right near the ignition (however not series 2) then these model are consider compliant in that argument.   For the Self Cleaning aspect of this argument clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles Now i can understand the argument that Xenon will need a washer as they are over 2000 lumens, but I clicked on the 12 at the end of that sentence and it takes me to the end notes which states R34 for headlight lenses are plastic, not sure if PL is mark as I don't currently have my skyline to confirm that marking is there. But could you not technically get a lenses with the PL marking on it and then get away with the argument that you need a washer. I went through a quick read of the adr and might have missed something else that may cause them to be non-complaint.    But wouldn't these technically be complaint headlights   Would love to hear other people input on this and shed some light   Edit In regard to the the washer portion I might be mistaken ADR 45 (which I believe is Regulation NO.45) states 12 cd (candela) I dont understand that portion in regarding to calculating the candela if anyone can shed some light. Otherwise I guess throw in a washer for the headlight and you definitely comply.
    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
×
×
  • Create New...