Jump to content
SAU Community

Recommended Posts

my q to you is does ur car break traction on thirds??????

cause i noe i do :kick:

i think it will be more than 160rwkw cause thats all u said i can make on a T28, ur car makes 167rwkw and i made 158rwkw b4 the rebuild so noe i figure it would be more than 160rwkw

can you beat da EVo1 by the way cause i can!!!!!

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

my q to you is does ur car break traction on thirds??????

cause i noe i do :kick:  

i think it will be more than 160rwkw cause thats all u said i can make on a T28, ur car makes 167rwkw  and i made 158rwkw b4 the rebuild so noe i figure it would be more than 160rwkw

can you beat da EVo1 by the way cause i can!!!!!

I reckon the bluey would probably spin 4th, I've been in it before when it was first built on 7psi and it was a wheel spining machine, and a 13 second car to boot

I like the skylines, but go the bluey

You were beaten fair and square.  

The sooner you accept that, the sooner you can build a bridge and get over it. :D

no that wasnt the question of this topic i was saying is there a chance that he can only have what was said that is the thread!!!!!! 4 all i noe he has more than claimed as i believe!

thanku

i know someone who owns an original fj20 with not ONE kilomtere on it. it is still sitting on an engine stand... mmmm fj20. dr30s rule. as do bluebirds.

yes................................................................... :Bang:

i know a guy with a 4G63 with 160,000 km on it...........................

well back to then original thread.....

my point being i think he had more than what i was lead to beleive

what makes you say that? is it because he had a shitty old FJ bluebird and you had a cool new skyline? as said befor he beat you fair and square get over it....

what makes you say that? is it because he had a shitty old FJ bluebird and you had a cool new skyline?  as said befor he beat you fair and square get over it....

datsun boy i think that is just uncalled for if u cant say nething nice dont say nething at all

thanku

my q to you is does ur car break traction on thirds??????

cause i noe i do :kick:  

i think it will be more than 160rwkw cause thats all u said i can make on a T28, ur car makes 167rwkw  and i made 158rwkw b4 the rebuild so noe i figure it would be more than 160rwkw

can you beat da EVo1 by the way cause i can!!!!!

when moving in a straight line, boot to the floor in 2nd, it will wheelspin from around 3k RPM onwards....come off the clutch a little to quick into 3rd and its wheelspin again to redline....come off the clutch hard into 4th and it wheelspins for a bit, then the roadspeed catches the wheelspeed.

it also sits on the brake in 2nd at 1500rpm quite happily :P

peak power is not the way to make a fast car....just a dyno queen....

i think you need to close your wallet and do some research.....

no that wasnt the question of this topic i was saying is there a chance that he can only have what was said that is the  thread!!!!!! 4 all i noe he has more than claimed as i believe!

thanku

/

Just to be different. RB20 non turbo. 185kws tripple webers. Thats a motor

I see you still haven't gotten over the fact that a car that probably cost less than $10000 to build kicked your arse.

thats alright see iam not fussed cause girls like skylines, and i can still beat bogans in V8's thats good enough 4 me!!!!

actually read the origanal thread i think that goes to most ppls here

dude have some common sense, you could spend endless amounts of dollars on a rebuild, its not gonna make it much, if any quicker.. your engine was probably fuct b4.

lighter car, lighter smaller engine... less pistons too turn over, less inertia...

consider this, they are the same ruff capacity (.2 woohoo) the bore and stroke of the FJ20 is going to be far closer to square, it can rev all day, it has a physically bigger turbo, and they are tuffaz nuts.

and thats comming from someone who owns an RB engine.

do yourself a favour either buy a bigger turbo and get a dyno tune, buy a turbo bluebird.. OR STFU!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...