Jump to content
SAU Community

Help needed

Mr.R33

By Mr.R33,
in Queensland

 Share

Recommended Posts

Mr.R33 Enthusiast

Mr.R33

Posted
Posted

This is going to sound like a really strange question.... but

I have just recently had new tyres fitted to the back of my R33 gtst ( 265x35x18)

and for some reason the steering is now reacting really badly. I was maybe even thinking that when the tyre place changed the tyres they might have jacked it up using the HICAS steering rack instead of the Diff.

So what I need to know is with the HICAS can you actually see it moving when you turn the wheels when stationary or very slow? ( like I know you can on Hondas with 4 wheels steer)

or does it move so slightly that you can't see it?

I can't see mine moving so if they are meant to then I have found my problem.

If someone could help me by looking at their line I would really appreciate it.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/58808-help-needed/
Share on other sites
Mr.R33 Enthusiast

Mr.R33

Posted
  • Author
Posted
And...  FYI...  He, is a she...  :P

Who is a She?

Any way Thanks for the help fellas,

So Hicas is set up for high speed cornering?

I thought it was like the Honda 4 wheel steering and was set up to only work for low speed cornering, moving only a couple of degrees?

Does anyone know how to run a diagnostics on the Hicas, cause I have no way of knowing if anything is damaged.

I took the car back yesterday and they put the car on the hoist, you could quite clearly see where the jack had hit the hicas module.

they said it was only a minor mark and they reduced the tyre pressures down to 30 psi to solve the problem ( my opinion that only masked it)

Not sure what I do from here now..... Guess I take it back down to Gavin at Autotech and see if he can find anything wrong!

Thank again for the help

Link to comment
https://www.sau.com.au/forums/topic/58808-help-needed/#findComment-1126451
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...