Jump to content
SAU Community

Recommended Posts

I have just personally imported the above vehicle. I live in

Tassie so generally there isn't many options when it comes to people that deal with imports so I'm going to ask some questions here.

According to Transport Tas, the only major modification I need to do is australian compliant seatbelts in the vehicle (as well as some other minor stuff...). This is easy I can do this myself. My question is, does anyone know where I can source seatbelts to fit this vehicle? or is it possible to source them from another model car and fit them into the R32?

I haven't taken a good look at the seatbelts yet, but I have a HR31 I may be wrecking I was hoping the seatbelts may be able to swap over...

Cheers

Paul

Link to comment
https://www.sau.com.au/forums/topic/58872-getting-my-r32-4-door-on-the-road/
Share on other sites

If I was in your position, I'd just put the r32 items in (if they fit) and get it over the pits with them (because they are most likely going to be ADR compliant, as its an Aus released car...) and then swap the old ones back in.

How easy do you guys have it over there?! Don't you have to do intrusion bars, child points etc??

blacky

Well, apparently 2 weeks ago we didn't even have to do seat belts either, but now we do :D Slowly they are bringing us into line with Victoria, so next is intrusion bars etc... I want to get it on the road before i have to do more crap to it!!

Anyhow, some contacts for possible seat belt purchase would be good, i'd rather have it done properly rather than doing a dodgy and swapping back to the jap ones... however either or is fine with me in the end, i just want to get it regged :rofl:

If you just want it regged, then go the swap-swap method. The Jap belts are perfectly good. But i cant really offer any contacts for you as I dont know what outlets u have in tassie, perhaps the equivalent of Supercheap/Repco, or maybe even order direct from Klippan?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...