Jump to content
SAU Community

Recommended Posts

Hey ppls.

Well, I had to fill my car with Vortex on Sunday night because I was too far away from a BP station and didn't have the fuel to try to get where i was going.

Anyway, later in the night, I'm driving back from seeing "Saw" (sick arse movie, it was great) and something interesting happened.....

LESS than 2000 rpm, almost 80 kph, just accelerating up to 80 after somebody slowed down in front of me and the engine light starts flashing......

Engine just comeing on boost, probably about 5 or 6 pounds on tap.

So I slow down and try again, and same thing.

Happens again in 4th, at around 2000 rpm, sometimes stops with the pedal down, sometimes not.

Doesn't happen in third, or at full throttle anywhere else in the rev range.

I'm assuming this is knock, but I'm not sure.

Can you make an enginee knock at 2000 rpm?

How much damage am I doing at those rpms anyway??

Does this mean I should go out and buy new cams and get my turbo highflowed and put in a built engine to stop it from even happening :P

All help appreciated.

I'm off to buy some octane booster....

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/
Share on other sites

Bass;

knock is not your friend at any rpm but obviously high levels are worse than low levels

what mods do you have. seems that timing is 'on the edge' with 98, if your ecu has been tuned did the tuner give you any safety margin for bad fuel etc

even the best built engine will knock if the tuning is not right so cams and turbos are not likely to help if there is something fundamentaly wrong

might have been just a bad fuel batch

have you checked wastegate connections etc (although you said it knocked @ low psi boost)

regards

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/#findComment-1129309
Share on other sites

  • 4 weeks later...

I was on holiday in Apollo Bay recently and had to fill up with that crap 96 octane 'premium' at BP... I was so paranoid that the motor would ping but I wouldn't put octane booster in as it fouls the plugs, if I had coppers in I wouldn't mind... but not with platinums

Hey Bass I have some cams sitting on the floor at home, if ya want them :)

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/#findComment-1159993
Share on other sites

Just to add to the thread......

I ended up having to fill up with the Caltex 'Premium' the other day, and in concert with the warm temps atm (40+ Deg in Bathurst) - I had plenty evil pinging/knocking moments, under mild boost <>5-8psi...

It was just like a tin can full of pebbles... :-/ !!!

As soon as I could mix what was in the tank with real BP fuel, no pinging at all, even when given a good flogging to see if it was the fuel.

I've heard of a few reports of this, especially with the cheaper fuel (Serves me right, tbh)

feed thy beast properly!!!

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/#findComment-1162048
Share on other sites

zebbie, on those hot days, be careful of ANY sort of flogging no matter how good fuel youve got in the tank! with ambient temps of 40+ intake temps would be frying! especially if youve got a tuned ecu as they are often tuned closer to the limit than a factory ecu. PLUS while your factory temp guage might be sitting sweet in the middle, i guarantee you youll see water temps over 100deg! even more so if with the a/c pumping!!

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/#findComment-1162060
Share on other sites

I was guessing something along those lines.... I am trying to get a standard airbox atm, for modding as my input temps were high on a standard day (hks pod/mushroom - 20 deg c ambient, 40 deg c actual input - on a decent probe)

God only knows what the real input temps are on a day like the last few.

When i've got a standard airbox, we're modding it into a ram input from the underneath of the indicator cluster, which'll help a lot.

I've also got a mines ecu, which is running rich atm, just to add to the rest of it.

Link to comment
https://www.sau.com.au/forums/topic/59104-knock/#findComment-1162078
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...