Jump to content
SAU Community

Recommended Posts

Hiya

I know theres already a tonne of alarm threads but they didnt really help with my prob.. maybe i may have missed it whilst skimming through.

Anyhow, could anyone with knowledge of the brant nemesis tell me if its normal for the alarm to self arm if the car is off? The reason i asked this is that today, i noticed that my car whilst it was off and me sleeping inside armed itself. I disarmed it thinking i may have pressed the button accidentally (dont see how) but anyways, it happened again after around 2mins.

I disarmed it, resetted the ECU and it did it again.. =(

Think i'll call the guy up tomorrow but hoping i could get some answers right now.

edit: with self arm, i dont mean just the keypad ( i know that activates after like 40seconds the car is off, i mean the entire car such as central locking etc)

Thanks

Eric

Link to comment
https://www.sau.com.au/forums/topic/59359-brant-nemesis-help/
Share on other sites

oh it goes of while ur sitting in it??? mine re arms the pad but i can sit in it and i watch it re arm but the sensors wont kick in unless i re arm it my self...weird its re arming the pad and the sensors might wanna give em a call..i had alot of probs with them at 1st thing was goin off at 3 am for no reason...neighbours loved me...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...