Jump to content
SAU Community

Recommended Posts

WSID (Western Sydney) is $45, $5 of which goes into a prize pool for the best 3 reaction times of the night (and also another pool for anyone that gets a 0.000 R/Time).

When busy you'd get a solid 5 runs however over the last 3mths you'd easily get 10 runs in a 5hr session (Wednesday nite).

Calder Park charge $55 -generally you can only get a few runs in because it's always PACKED.

Drift sessions - $100

Open practice - $165

Heathcote (drags) costs around $40 (depending on the size of the group, or type of meet)

IIRC, at AIR (adelaide) on a weeknight 4,6 & rotary meets its $35, and then $50 on the weekends. The two times ive been Ive been able to get 10 runs, and plenty more if I wanted to. Kinda sux when you have cops camping out the front gates on drift meets tho..

just a question because some venus may not have insurance for people on thier p's you must admit it is a bigger risk for a p plater to go down the 1/4 than an open licenced driver

I don't agree with the "Bigger Risk Between p's and opens"... So your saying that some one with a P's who is 23 and has been driving a skyline for 3 - 4 years and had more experience, compared to some one with an Opens, who has only had the car a month and no experience. It seems as though you are biased against P's going down the track ? why is that? and what is the whole point of this thread in the first place ?

no definatly not i am looking at the insurance companys point of view they see some one who has had thier licence for 10 years and no accidents and they lower thier preimums. As oposed to some one who has driven a car for 1-2-3 or 4 years haveing not had much experince behind the wheel thier insurance is higher it is just pure fact

Hence the thought of if you owend a drag strip and had it open to every one your insurance would be higher. As oposed to haveing every one with thier open licence could race on the track and p platers were banned thier insurance would be lower

this situation could happen in the next year i personaly hope it dosent it will kill 1/3 of the sport (i new this would get some peoples backs up but you cant keep every one happy)

and if you dont like the thread dont reply to it . Geting the prices for every drag track in oz and seeing what value for money you get from track to track maby some one from NSW pays 50 bucks for 4 runs while some one from VIC pays 50 bucks and runs all day the person from NSW can put to the track opperator thier complaint about being ripped off

or dont you like money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...