Jump to content
SAU Community

Recommended Posts

Need to sell my car: this car has made 540Hp over 400 KW on 18psi

The car is Black in colour with Red leather interior 2 recaro bucket seats, Sports steering wheels with lap timer, Apexi Rev/speed meter, Sound System with Kenwood 7" DVD player with TV recievers Eboost Gauge and 2 autometer gauges in a dual gauge holder mounted on the pillar.

Performance

RB30 Bottem End, Wiseco forged pistons, Gabbless Rings, steel rods, arp bolts all round, O ringed, and reciever groved ceramic coated chambers and pistons, Nismo Racing Oil pump, Nismo Water pump , Head has been ported with HKS Steel Values and Springs, GTR style head, Copper head gasket, Tomei Stage 2 Cams and gears, This engine was built 1000kms ago with paper work and warranty Built to handle 700Hp + @flywheel

Turbo: T66 Garrett 900HP Turbo dual ball bearing rollers, external Tial wastegate with Stainless steel manifold. Large Front mounted intercooler with Blitz blow of Value. 3inch Stainless Steel exhaust system.

Fuel System : 950cc SARD injectors Malpasi Fuel Reg, Bosch 044 fuel pump with surge tank GTR in tank pump working as Lift pump.

Ignition: M & W ignition pack, external coil pack 10mm custom made Spark plug leads.

ECU : Microtech LTX12 computer requires a 3 bar Map senor to run more than 18psi.

Microtech Dash

Exterior: 400R side skirts and rear bar , Drift wing (flat boot)

Tyres 20” x 8.5 Front 20” x 10.5 rear Kaokic rims

Brakes: Cross Drilled and slotted brakes all round.

Suspension : Tein HA adjustable suspension

$35000

Link to comment
https://www.sau.com.au/forums/topic/59778-r33-s2-1996-400kw-on-18psi/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...