Jump to content
SAU Community

Recommended Posts

selling from a unfinished vl turbo project

this engine is out of a 1998 series 2 r33 skyline

RB25det

custom plenum chamber with xf throttle body

custom high mount exhaust manifold

t04 turbo with external 38mm wastegate

engine also comes with the stock plenum and stock exhaust manifolds :wassup:

for more info contact me on [email protected]

motor has been inspected by a licensed mechanic and compression tested

also bottom end has been balanced out for extra horsies

im after 3700 o.n.o for the wholelot

Link to comment
https://www.sau.com.au/forums/topic/60304-fs-rb25det-series-ii-76thousnd-kmz/
Share on other sites

can it be seen running? whats was the psi from each cylinder from the compression test? what mechanic said all this about the balancing? when did u get the engine/where from?

whats going in the car after the rb25 is taken out?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, don't bother doing any actual measurements on the car. Just go ask the inter-f**king-net.
    • I currently have 18 x 9 +30 on the front with 18 x 10.5 +38 on the rear. Absolutely regretted it. Ended up putting 15 mm spacers on front and 25 mm spacers on the rear. Not to mention the rears were like a mm from hitting the coilovers. Definitely would go more aggressive then what you were originally planning. Keep in mind my guards are rolled and cars fair low so you might possibly need to roll guards depending how aggressive you go and how low the car is. Im not an expert but the 18 x 8.5 +25 18x9.5 +30 Sounds like it would sit much better.
    • Hey guys, sorry i have been researching for a few months and absolutely cannot wrap my head around this. I am about to order some rims to fit my R34 Gtt with coilovers My original plan was to order Rota grid R in 18x8.5 +30 235 40 R18 Fronts 18x9.5 +35 255 35 r18 rears But then the thought in my head said this isnt aggressive enough. I want the most concave spokes i can get without too much of poke and scrubbing   So my thoughts now is  18x8.5 +25 18x9.5 +30   My question is will this be the most aggressive i could get it without any guard rolling and does the type of rim style affect the offset / size.   Thanks everyone.
    • Lower parts are there. On passenger seat, bright yellow bit is the release mount. On drivers, bright yellow bit is the lower buckle for the other side. My bet is lowers are tucked out of the way as much as possible for visuals.
    • I'm guessing its a 4 point harness, 3 of the 4 belts are visible. I'm guessing the hidden belt is tucked down between the seat and door. 
×
×
  • Create New...