Jump to content
SAU Community

Recommended Posts

Right, I wonna get a full kit on my R33 but have some issues.

I love the Veiside rear bumper, not sure about the skirts and absolutly hate the front bar. Im not a wing fan of any kind so im going for the little stealth drift wing.

Right now im thinking;

Trail or Jun front bumper

Veilside rear

400R or Veilside skirts

Drift wing

What do you all think?

Trial Front

http://www.skylinegts.co.uk/images/R33-SilverF.jpg

Jun Front

http://www.uniqueautosports.com.au/priceli.../r33aerobar.jpg

Veilside Rear

http://www.uniqueautosports.com.au/priceli...eilsidekit2.jpg

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/
Share on other sites

agreed, not a fan of the veilside stuff but the rear bar is better than others.

was thinking of a JUN kit myself but decided i don't like small things like the way it curves around the wheel arches.

i'll probably end up making a custom rear bar and getting 400R skirts and a Trust front bar <3 the Trust.

haven't seen a full trust kit though i'd be interested in seeing what that looks like

i'd go Trial front, 400R side, Veilside rear.

no spoiler at all for me though... not a towel rack fan.

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/#findComment-1146356
Share on other sites

I think that a "Top Secret" front bar, "Jun" sideskirts and a "Veilside" rear bar would be a great combination. I know u havent mentioned the top secret front bar but i think it is a great bar and is worth having a look at.

If u want any pics of the top secret front bar, just check my gallery :)

:D

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/#findComment-1149492
Share on other sites

I think that a "Top Secret" front bar, "Jun" sideskirts and a "Veilside" rear bar would be a great combination. I know u havent mentioned the top secret front bar but i think it is a great bar and is worth having a look at.

If u want any pics of the top secret front bar, just check my gallery :)

:D

YES very nice, I agree with the choice.....very agresive and looks the natural part for the series2, wouldlike to see it on the serie1......

been told that it is designed for GTR and is 1inch wider on both sies than GTST...(Xspeed told me so) , in fact I tried to find one in PErth and nobody had one.....

Think it is known as Trust Grex front Bar......

I had to go with the Jun front bar.......

:flamed:

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/#findComment-1149600
Share on other sites

PS

What you guys should know that most people around town have mould from JP.

The fibreglass versions are very thin.

And things you should look for:

Is the metal bumper under, to see if the extrusions and styles will fit on it? As in most cases the shops will crop the metal components off. Reducing the metal bar to nothing. In case of the accident you will have your front mount, mounted in your teeth.

Also you have to check against your original that the two front mounting clips are 500mm wide not 51///as per my Jun bumper. :)

And if the tension is greater on one side under the lights (where the two screws are) than return the entire thing back. Most fibreglass cracks are in that area, and the main reason for that is the speed. The speed at which they make the bumpers. No support in the bends.

Make sure the Fglass is smooth and that there are no rough areas. These areas will crack first as the Fglass will tension the dents under hard driving.

Final word,

Always wanted to have a nice kit on the car. I even designed my own and attempted to make it. Not everything is good product out there. So if something isn’t broke, don't mess with the perfection of mister Nissan :P And be careful of shops making and selling shit.

I learned the lesson the hard way!!!

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/#findComment-1150324
Share on other sites

Ok, ok, where can i get a Top Secret one from! That looks wayy cool. Its not an original is it?, that would cost an ass load. Anyway anyone know of them being in perth and how much they are?

You are correct. I went all around town to find one. Nobody had one.

Think only Fiber vision can do one, cose they do custom kits. They are in Welshpool somewhere...... Xspeed had a car done 4 years ago in red with the same bar.

Was told it had to be cut down 1" on both sides as it was designed for wide body on GTR.

Original front bar, just the front wind dam would set you back 2k....cose it has to be imported...... Fiberglas I don't know about 600 like the Jun one non-painted....

Good luck, Tell me if you find one.

FiberVision was closed one friday when I went shoppin :)

no CURE!!!

:kick:

Link to comment
https://www.sau.com.au/forums/topic/60342-bodykit-combo/#findComment-1150493
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...