Jump to content
SAU Community

Recommended Posts

:)

I appears you dont know very much about the cost of respraying a car, that or you expect to have it done on the cheap and dont really care about the quality of the end result.

Id budget at least $5k for a respray, and maybe more if a colour change is involved.

Having contacts in the paint/panel industry helps - but if you expect to walk into a panel shop and receive a $2k respray you will get a very rude shock

start by calling up every panel shop in the white pages, tell them you want a high quality respray for a good price and ask them how "booked out" they are.

None of them will want to give you a figure over the phone without knowing what kind of car it is, if theres any damage already etc. Tell them your just shopping around and you'd like a "ball park" figure that you can work with. Answer any questions they have and ask for their best "cash price".

Narrow it down to the 5 cheapest then go around and personally talk to them about what they would do, ask them if it will look 'as good as new' and if the paint job will last so you can get ideas and statements about quality.

Ask them questions like:

- Who will be doing most of the work and how experienced are they? (are they going to put the 19 year old apprentice onto it?)

- What type of paint will they be using and how long you can expect it to last before it starts fading

Dont be afraid to ask simple, seemingly stupid questions and be thorough.

At the same time though, when it comes to cost I would not expect to find many places that would do a full respray for under 3 grand. And if you do it will most likely be a one or two man operation with very very low overheads.

But if you can find a workshop thats desperate for work as they have no customers booked in you might get lucky and they will spend two weeks on your car because they've got nothing else coming in for almost cost to pay the rent and keep the doors open. I find if you pop in every 2 days to 'see how its going' the quality of work will be higher as well.

Being a tight arse is okay, just put in work making sure you get quality as well.

Hope this helps.

3k-5k is a lot of money. But 3k-5k is not a lot of money to spend on a paint job.

Yeah, if you're going to be tight about it, don't bother with the respray, just get the panels done that need it.

When I had a Silvia I had it resprayed for $1600, but they used acrylic paint and didn't clear coat, so you get what you pay for.

Mine paint job was about $10,000 and the car was in good condition to start with. Add an extra couple of thousand for a body kit and fitting and you have no change out of $12,000.

If you only have $2000, enrole at TAFE in an automotive painting pre-voc course, get an apprenticeship then in 15 to 20 years paint it in your own workshop for the cost of materials only. (you may even get change from $2000)

Mine paint job was about $10,000 and the car was in good condition to start with. Add an extra couple of thousand for a body kit and fitting and you have no change out of $12,000.

If you only have $2000, enrole at TAFE in an automotive painting pre-voc course, get an apprenticeship then in 15 to 20 years paint it in your own workshop for the cost of materials only. (you may even get change from $2000)

I didn't ask you to recommend me to go to tafe to spray the car myself.

If you don’t have a proper suggestion then don’t bother posting at all.

Sorry if you didn’t like the answer, but it is a serious suggestion and about the best option I can see for you with a budget of $2000. :) If you don’t like it then ignore it. I guess you wont want to see my suggestion if you are after a $200 paint job then. :headspin:

I already have a university degree so you can get ******

Sounds like a graduate who thinks the world owes them a living. :usuck:

What’s wrong with TAFE? Sorry but you came on the forums asking s somewhat ridiculous question, that has to either be dismissed as being another 13 year old with no grip on reality or someone who is going to need a creative solution.

Your uni degree really means squat, I have a couple of degrees myself as well as experience lecturing and tutoring at various institutions.

hahaha uni degree's.....i think i spent about 1500 on materials when i did my car......is it possible to do a uni degree on "Life in the realword"?(jk)You might find some dodgy leb in campbellfield that will do it....but you will most likely have runs/dust in the paintwork not to mention when it comes off in sheets the first time you wash it you go back to find that the cops have raided the joint and theres nothing there but carcus's of calved up VL BT1 turbo bodyshells and a sheep grazing in the backyard to keep the grass down untill bail is set :)

ahahahaahahah

a leb is doing my car for $1700 inside and out. He is my relo. Might still end up wit a dodgy job, but hey i know where he lives. ahahahaah nah, im only paying for oven hire and paint. not even. Im doing all sanding myself. all putty works ill leave to a pro. Try doing all labour urself which makes up most of the cost, look for the paint urself also. but dont try fixing any dents without a pro. then just get it sprayed after that.

but as the other guys sed, just fix and spray the panels that need it.

man wat can i say, if u dont have connections then its gonna be very hard for 2gs. i got quoted 7gs without a bodykit. just matters on the finish u want.

anyways goodluck

in all seriousness one of my mates got his VL resprayed in hot green for 3k. It looks perfect, no fading issues and probably perfect for a street car.

I think you wouldn't have both oars in the water if you spend 10K on a paint job unless the car was strictly for show.

For the road, with the potential for damage, chips, elements etc, 2-3K will get you a nice respray.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...